PLASH

PLASH Bug remover cleaner quickly dissolves bug residue from headlights, glass, mirrors, and bodywork. It removes sticky bugs easily without hard rubbing, stopping bug acids from causing permanent paint damage. Quick cleaning: Dissolves bug residue in 2 minutes for easy rinsing without scrubbing. Paint protection: Prevents scratches by lifting organic contaminants safely. Coating safe: Approved for cars with ceramic coatings, paint protection film (PPF), or wax. Capacity: 500ml. Directions for use Prep: Use right after a trip for best results. Make sure all surfaces are cool to the touch. If needed, cool the vehicle down with water first. Apply: Spray Plash KUKAIŅIEM directly onto bug-covered areas like the bumper, hood, lights, mirrors, and glass. Leave on surface: Let the product react for about 2 minutes. Do not let it dry on the surface. Rinse: Wash off thoroughly with a strong water stream. Repeat: Repeat the process if needed, then continue with your normal wash routine. Product details & safety Use with the included spray trigger. Wear protective gloves and shake the bottle well before use. Do not apply to hot surfaces or in direct sunlight. In warm weather, work in the shade and cool the bodywork with water until it is cold to the touch. Test on an inconspicuous area before first full use.

Lasīt vairāk mazāk

PLASH BITUMS Tar remover created to dissolve and safely remove bitumen, tar, sap, glue, and oil spots from vehicle surfaces. It removes sticky layers to restore paint shine and help water-repellent coatings work properly. Effective cleaning: Dissolves and removes bitumen, tar, sap, glue, and oil stains. Surface safe: Approved for bodywork, glass, plastic, and metal surfaces. Bundle items: Includes a 500ml bottle, a spray trigger, and one 300 GSM microfiber towel. Directions for use Wash: Wash the car completely with shampoo and a wash mitt. Wipe away excess water or let the surface dry. Apply: Ensure the vehicle is cool and dry. Spray the product onto the bodywork using the included trigger. Work in a shaded area. Leave on surface: Let the product react for 1–5 minutes. Do not allow it to dry on the paint. Wipe: Gently wipe the surface with the microfiber towel without pressing hard or scrubbing. Repeat if necessary. Rinse: Rinse the car thoroughly with water to remove all remaining product residue. Product details & safety Use only outdoors or in well-ventilated spaces. Do not apply to hot surfaces or in direct sunlight. Test on an inconspicuous area before first full use. Always wear protective gloves. Remove the spray trigger after use, screw the original cap back on, and store only in the original packaging.

Lasīt vairāk mazāk

PLASH MAIGAIS High-foaming wheel and tire shampoo created to clean daily dirt and deep deposits. It removes wheel yellowing, oily grime, and baked-on road dirt while remaining safe for surfaces. Wheel cleaning: Removes yellowing and baked-on road grime from wheels. Tire safe: Effectively cleans tire rubber without causing damage. Alkaline formula: High-foaming, alkaline composition that is gentle on surfaces. Capacity: 500ml. Directions for use Prep: Shake the bottle and spray the product evenly onto a completely cooled, pre-rinsed wheel which has tar and iron fallout removed prior to washing. Leave on surface: Let the product react for 1–2 minutes. Do not allow it to dry. Agitate: Clean the dirt using a wheel brush, detailing brush, or microfiber mitt. Use a separate mitt for wheels to avoid scratching the paintwork. Rinse: Rinse the wheel thoroughly with water to remove all product residue. Repeat: Clean each wheel one by one. Product details & safety Test on a less visible area before full application, especially on polished, chrome, anodized, or matte wheels. In hot weather, work in the shade and cool the wheels with water until they are cool to the touch before application. Clean each wheel individually; do not spray all wheels at the same time. Do not let the product dry on the surface. Wearing protective gloves is necessary. Store only in the original packaging.

Lasīt vairāk mazāk

PLASH NIKNAIS iron fallout remover is an effective, foaming product created to clean wheels and vehicle bodywork from brake dust and embedded metal particles. It chemically dissolves sharp iron contaminants and oxides to prevent rust formation and paint damage. Turns purple during the cleaning process. Brake dust removal: Cleans brake dust and iron particles from wheels and paint safely. Rust prevention: Eliminates metal contamination to stop rust spots before they form. Color indicator: Turns purple when reacting with iron particles to show the product is working. Surface safe: Safe for all wheel types and exterior vehicle surfaces. Capacity: 500ml. Directions for use Prep: Shake the bottle. Ensure the surfaces are cool to the touch. Spray Plash NIKNAIS evenly onto the wheels and bodywork. Leave on surface: Let the product react for 2–5 minutes. Do not allow it to dry. The liquid will turn purple as it dissolves the metal. Agitate: Use a detailing brush on wheels to foam up the product and clean deep into corners and crevices. Rinse: Rinse all surfaces thoroughly with a high-pressure washer. Do not leave any product residue behind. Repeat if necessary. Product details & safety Use with the included spray trigger. Recommended for use every 2–3 months as a final step in your wash routine. Do not apply to hot surfaces or in direct sunlight. Do not let the product dry on the vehicle. In warm weather, work in the shade and cool the surface with water before spraying. Wearing protective gloves is necessary. Test on a less visible area before first full use. Made only for metal particle removal. For full wheel detailing, use wheel shampoo for road grime and tar remover.

Lasīt vairāk mazāk

PLASH Leather conditioner created to protect vehicle leather from drying, cracking, and UV damage. Made with natural oils to restore elasticity, softness, and a natural matte look. Deep hydration: Restores leather elasticity and softness long-term. Uv protection: Prevents surfaces from drying out and cracking under the sun. Natural oils: Safe for all natural and synthetic leather interiors. Matte finish: Leaves a clean, non-greasy appearance without artificial shine. Economical use: The 150ml bottle lasts for 7–10 applications (1 spray delivers ~0.20ml). Directions for use Clean: Clean the leather first using leather interior cleaner. Prep: Wait about 15 minutes for the surface to dry. Shake the bottle and spray the conditioner 3–5 times onto an applicator pad. Apply: Work the product evenly into the leather using circular motions, moving from top to bottom. Work in sections. Use a clean microfiber towel to level the product if necessary. Leave on surface: Allow the conditioner to absorb for 15 minutes to fully hydrate, soften, and protect the leather. Product details & safety Use with the included spray trigger and apply with a microfiber or sponge applicator pad. Approved for both natural and synthetic leather. Keep out of reach of children.

Lasīt vairāk mazāk

PLASH LEATHER CLEANER - a foaming cleaner to safely remove dirt, grease, and residue from natural and synthetic leather. Prepares surfaces for protective coatings. Surface safe: Approved for both natural and synthetic leather. Foam action: Prevents overwetting and ensures even product distribution. Reusable dispenser: The 150ml bottle delivers roughly 200 pumps (~0.75ml per pump), lasting for multiple full cleanings. Refill option: Available in a 500ml version to replenish the foam dispenser. Directions for use Vacuum: Vacuum the interior thoroughly, focusing on seams and crevices. Apply: Shake the bottle and pump foam 2–3 times onto a scrub pad or soft brush. Clean: Scrub the leather in circular motions. Work in sections (e.g., divide a seat into 3–4 areas). Wipe: Use two microfiber towels. Wipe away product residue with a slightly damp towel, then dry the surface completely with a second towel. Protect: Repeat if necessary. Once clean, apply leather protection. Product options Foam dispenser: 150ml bottle with pump nozzle. Refill bottle: 500ml bottle for dispenser replenishment.

Lasīt vairāk mazāk

PLASH interior cleaner maintains a clean cabin, removes grease, and eliminates unpleasant smells. Odor neutralization: Neutralizes bad smells and leaves long-lasting freshness. Grease removal: Cleans greasy spots and oily fingerprints from interior surfaces. Daily maintenance: Makes regular cabin detailing quick and easy. Surface safe: Safe for use on all vehicle interior materials. Capacity: 500ml. Directions for use Prep: Shake the bottle before use. Apply: Spray the cleaner directly onto a microfiber towel or an interior scrub pad. Wipe: Clean the target surface, then wipe it dry using the opposite side of the towel or pad. Brush method: When using a detailing brush, spray the product onto the bristles. Agitate the surface using circular motions, then wipe away the loosened dirt with a microfiber towel. Product details & safety Use with the included spray trigger. Keep out of reach of children.

Lasīt vairāk mazāk

PLASH Glass cleaner for clear, streak-free windows. It removes grease, grime, and fingerprints without evaporating too quickly, allowing for easy wiping - has apple aroma. Cleaning power: Removes grease, fingerprints, and road dirt. Streak-free finish: Leaves glass clear with no residue. Ammonia-free: Safe for all glass types, including tinted windows. Capacity: 500ml. Directions for use Prep: Shake the bottle before use. Apply: Exterior glass: Spray the product directly onto the glass and onto your microfiber towel or cleaning mitt. Interior glass: Spray the product onto the towel or mitt only to avoid overspray on interior surfaces. Clean: Wipe the glass thoroughly to remove dirt and grease. Dry: Wipe the glass with the dry, smooth side of the mitt or a clean microfiber towel to absorb product residue. Repeat: Repeat the process if necessary. Product details & safety Use with the included spray trigger. Do not use in direct sunlight or on hot surfaces. Ensure glass is cool to the touch. Clean large windshields in sections for easier wiping. Test on an inconspicuous area before first use.

Lasīt vairāk mazāk

PLASH ATKUSNIS ice removing solution, glass cleaner created to melt ice from vehicle windows in seconds for clear driving visibility. It replaces the ice scraper to protect glass from scratches and helps prevent re-freezing. Regular use extends the lifespan of wiper blades and rubber seals. Ice melting: Melts ice on glass surfaces quickly in cold weather. Glycerin protection: Keeps wiper blades and rubber seals soft to prevent cracking and premature wear. Anti-freezing: Reduces the risk of repeated ice formation on the windows. Scent: Features a cinnamon aroma. Capacity: 500ml. Directions for use Prep: Shake the bottle well before use and turn the nozzle to the spray position. Apply: Spray the product evenly onto the frozen glass surface. Leave on surface: Let the product react for a brief moment. Clear: Remove the remaining ice residue with a snow brush or your vehicle wiper blades. Repeat: Reapply and repeat the process if dealing with thick ice layers. Product details & safety Application: Use with the included spray trigger. Keep out of reach of children.

Lasīt vairāk mazāk

Daily maintenance spray created to quickly clean light dirt from the vehicle body without a full wash. It evaporates quickly, leaves no streaks, and adds a light shine. Silicone-free. Light cleaning: Removes dust, water spots, and fresh bird droppings. Scratch protection: Lubricates the surface to reduce friction during wiping. Surface safe: Approved for use on all exterior body panels and wheels. Capacity: 500ml. Directions for removing light dirt Prep: Shake the bottle. Ensure the surface is cool and free of heavy dirt. Apply: Spray the product directly onto the surface or onto a microfiber towel. Wipe: Clean the area evenly with a microfiber towel. Buff: Flip the towel to a clean side and buff lightly to a dry finish. Directions for use as a drying aid Spray: Shake the bottle and spray a few bursts onto the wet vehicle panel. Dry: Place a drying towel on the surface and pull it smoothly across the panel. Touch up: Spray directly onto any missed water runs or spots, then wipe clean with a microfiber towel. Product details & safety Use with the included spray trigger. Do not apply to hot surfaces. Do not use on heavily soiled vehicles without a prior wash.

Lasīt vairāk mazāk

Highly concentrated detergent created to clean and maintain microfiber towels, mitts, and applicators. Unlike standard detergents that clog fabric, this product chemically dissolves trapped waxes, silicones, polymers, and polishing pastes to restore original softness and absorbency. Restores performance: Renews microfiber softness, absorption, and cleaning efficiency. Extends lifespan: Prevents fiber matting and lengthens accessory usability. Deep cleaning: Removes stubborn detailing chemicals and compounding residues. Capacity: 500ml (sufficient for 16 washes under light dirt and medium-hard water conditions). Machine washing Setup: Select a gentle cycle (600–800 RPM) at 30°C–40°C. DO NOT USE SOFTENERS! Dosage: 1 cap = 10ml. Base the dosage on 2.5kg of dry microfiber material: Soft water: 20ml for light dirt, 30ml for medium dirt. Medium to hard water: 30ml for light dirt, 40ml for medium dirt. Dry: Shake out items after washing to straighten the fibers. Air dry naturally. Soaking method Mix: Use this method for clogged, non-absorbent, or heavily soiled towels. Add 50–80ml (5–8 caps) of detergent to 10L of warm water (40°C–60°C). Leave to soak: Submerge the microfibers and leave to soak for 1–2 hours, stirring occasionally. Wash: Move the microfibers to the washing machine and run a cycle using the medium dirt dosage. Care & safety instructions Do not dry accessories on radiators, as extreme heat makes fibers hard and abrasive. If soaking and washing fails to restore full absorbency, downgrade the towel for use on wheels, engine bays, or lower body trim.

Lasīt vairāk mazāk

PLASH SPĪDUMS Hydro wax created to protect vehicle bodywork, repel water, and add deep contrast and shine. It prevents dirt from sticking and simplifies daily maintenance. Hydrophobic effect: Lasts 2–3 months when applied to a thoroughly cleaned surface. Surface protection: Protects bodywork, adds depth to paint, and eases daily cleaning. Coating safe: Approved for vehicles with paint protection film (PPF) or ceramic coatings. Capacity: 500ml (sufficient for two applications on a medium-sized vehicle). Directions for use Wash: Manual contact wash. Then remove tar residue and iron fallout, thoroughly contact wash again. Apply: Spray Plash SPĪDUMS evenly in straight lines directly onto the wet bodywork. Use no more than half a bottle for a medium-sized car. Rinse: Rinse thoroughly with water immediately to level the product and activate the water-repellent effect. Rinse until white droplets disappear. Product details & safety Application: Use with the included spray trigger. Temperature: Do not apply to hot surfaces or in direct sunlight. Ensure bodywork and hood are cool. Timing: Do not allow the product to dry on the paint. Rinse immediately after application. Preparation: Perform a complete hand wash prior to application to remove stuck-on or greasy dirt. Maintenance: Wash regularly with pH-balanced Plash SNIEGS shampoo to extend wax durability. Shake the bottle well before use.

Lasīt vairāk mazāk

PLASH SNIEGS Concentrated foam product made to create thick, long-lasting foam. It also acts as a slick car shampoo created for safe manual washing with a microfiber mitt to prevent scratches. Thick foam: Creates a stable, slick layer for safe vehicle washing. pH neutral: Safe for all surfaces and protective coatings. Versatile use: Perfect as both a pre-wash snow foam and a standard car shampoo. Volume: 1000ml capacity. Directions for use Pre-wash: If the vehicle has not been washed for over a week, pre-wash with specialized pre-wash solutions first. Prep sprayer: Mix Plash SNIEGS with water at a 1:10 ratio (100ml product to 1000ml water) in the Plash foam sprayer. Do not exceed 1500ml total liquid volume. Close tightly and use the foam nozzle. Apply: Pump the handle 35–50 times, shake the sprayer, and apply foam evenly over the vehicle. Prep bucket: Fill a bucket with water and add 50–70ml of Plash SNIEGS per 10L of water. Insert the microfiber mitt and use a water stream to build foam. Contact wash: If pre-washed: Wash immediately with a microfiber mitt using straight lines from top to bottom. Rinse the mitt regularly in clean water. If not pre-washed: Rinse the vehicle, apply a new layer of foam, and then wash. Rinse: Do not allow the foam to dry on the surface. Rinse the vehicle body thoroughly. Care & safety instructions Wear protective gloves and shake the bottle thoroughly before use. Ensure the vehicle body and hood are cool to the touch. In warm weather, work in the shade and cool the surface with water before application. Do not apply on hot surfaces or allow the product to dry. Foam sprayer dilution: 1:10. Bucket dilution: 1:140 to 1:200.

Lasīt vairāk mazāk

Pre-wash concentrate created to prepare vehicle bodywork for more effective foam action. Plastic bottle, 1l package. Concentrated formula: Dilute at a 1:10 ratio (e.g., 100ml product to 1000ml water). Surface safe: Safe for use on all exterior vehicle parts. Application compatibility: Made for use with the Plash foam sprayer emulsion nozzle. Directions for use Rinse: Rinse the vehicle with water first. Prep sprayer: Mix Plash STARTS with water at a 1:10 ratio in the Plash foam sprayer. Do not exceed 1500ml total liquid volume for maximum efficiency. Close tightly and install the emulsion nozzle. Apply: Pump the handle 35–50 times, shake the sprayer, and apply evenly to all vehicle surfaces. Dwell: Let the product react for 1–2 minutes. Apply Car Shampoo foam directly on top to keep the surface wet and boost the pre-wash effect. Rinse: Rinse thoroughly with a strong water stream, starting with the dirtiest areas. Contact wash: Apply Car Shampoo foam to the car again. Afterwards perform a manual contact wash using a car shampoo & microfiber mitt.

Lasīt vairāk mazāk

PLASH TURBO is a powerful, alkaline-formula pre-wash designed for deep cleaning vehicle bodywork - 1l plastic bottle package. Formulated for demanding conditions to quickly dissolve road salt, oil, grease, bugs, and stubborn grime. Alkaline formula: Dissolves heavy road film and organic contaminants efficiently. Deep cleaning action: Lifts baked-on grime and winter salts. Fast results: Minimizes manual scrubbing by loosening dirt before the contact wash. Directions for use Dilute: Mix the concentrate with water at a 1:10 ratio. The bottle is sufficient for 5–8 washes. Apply: Spray the solution evenly onto the dry vehicle surface, starting from the bottom and working upward. Dwell: Allow the product to react for a few minutes. Do not let it dry on the surface. Rinse: Rinse the vehicle thoroughly with a high-pressure washer, moving from the bottom up. Care & safety instructions Do not apply on hot surfaces or in direct sunlight. Do not allow the product to dry on the paintwork. Test on an inconspicuous area before applying to sensitive finishes or chrome trim. Keep out of reach of children.

Lasīt vairāk mazāk

Dehumidifier bag designed to absorb excess moisture, eliminate musty odors, and prevent window fogging inside the vehicle. Net weight of 200 grams. Effective dehumidification: High-capacity absorbing crystals draw in moisture to protect upholstery and electronics from dampness. Odour prevention: Eliminates stale, humid smells to maintain a fresh interior environment. Reusable design: Includes a moisture indicator that changes color when saturated, signaling it is time to dry and recharge the bag. Directions for use Placement: Remove the product from its outer packaging and place it inside the vehicle (e.g., on the dashboard, center console, or footwell). Monitor indicator: Check the built-in indicator dot regularly. Blue: The product is active and absorbing moisture. Pink: The product is saturated and requires recharging. Recharge: Wrap the saturated bag in a paper towel. Place it on a microwave-safe dish with the indicator facing upward. Microwave for 6 minutes at 600W using a medium-low power setting. Reuse: Allow the bag to cool completely after removal. Once cooled, it is ready to use again. Care & safety instructions Do not puncture or cut the fabric bag. Ensure the bag is completely cooled after recharging before handling or replacing it in the car. Keep out of reach of children and pets.

Lasīt vairāk mazāk

PLASH Ultra-soft detailing brush designed for scratch-free cleaning of highly sensitive interior and exterior surfaces. Ideal for gloss black trim, instrument clusters, navigation screens, badges, and emblems. Synthetic Bristles: Feather-soft, split-tip fibers safely clean delicate finishes without scratching. Directions for Use Dry Use: Use the brush dry to gently sweep dust out of air vents, dashboard seams, and tight crevices. Wet Use: Apply your preferred interior cleaner or detailer, then use the brush to gently agitate and lift grime from delicate areas. Wipe: Wipe the surface clean with a soft microfiber towel. Care Instructions Rinse the brush thoroughly with clean water after wet use to remove chemical residue. Gently squeeze out excess water from the bristles. Hang the brush or store it flat to air dry naturally. Do not store bristle-side down to prevent deformation.

Lasīt vairāk mazāk

PLASH Heavy-duty wheel brush to reach deep inside wheel barrels, spokes, and hard-to-reach areas to remove stubborn brake dust and road grime. Soft bristles: Durable synthetic bristles safely scrub away dirt without scratching painted, chrome, or clear-coated wheel finishes. Comfortable handle and length: Non-slip plastic handle with a rubber hand guard provides a secure grip and helps remove dirt entirely when wet. Extra-long reach to make deep wheel cleaning quick and easy. Directions for Use Rinse: Spray the wheel with water to remove loose mud, grit, and debris. Apply Cleaner: Spray a dedicated wheel cleaner, iron remover, or all-purpose cleaner (APC) directly onto the wheel surfaces and into the barrel. Scrub: Insert the brush deep into the wheel gaps and agitate the surface firmly until a rich lather forms. Rinse Clean: Thoroughly rinse the wheel and brush with water. Care Instructions Rinse the brush thoroughly with clean water after each use to remove chemical residue and dirt. Shake out excess water and store the brush hanging or bristle-side down to keep its shape. Do not store near direct heat sources.

Lasīt vairāk mazāk

PLASH Heavy-duty cleaning brush designed to remove brown oxidation, road grime, and old dressings from tire sidewalls. Stiff Bristles: Durable synthetic bristles aggressively scrub rubber surfaces without causing damage. Comfortable Handle: Non-slip plastic handle provides a secure grip and helps remove dirt entirely when wet. Designed Shape: Engineered to match the curvature of tire sidewalls for uniform, easy cleaning. Directions for Use Rinse: Spray the wheel and tire with water to remove loose mud and debris. Apply Cleaner: Spray a dedicated tire cleaner, rubber cleaner, or all-purpose cleaner (APC) directly onto the tire sidewall. Scrub: Agitate the surface firmly with the brush until a rich, dark lather forms. Rinse Clean: Thoroughly rinse the tire and brush with water until the runoff is clear. Care Instructions Rinse the brush thoroughly with clean water after each use to remove chemical residue and dirt. Shake out excess water and store the brush hanging or bristle-side down to prevent deformation. Do not store near direct heat sources.

Lasīt vairāk mazāk

PLASH Manual pump sprayer creates thick, active foam for car detailing without a pressure washer. Active Foam: Transforms liquid cleaner into rich foam for longer dwell time and better dirt removal. Durable Design: Built with chemical-resistant seals to withstand harsh detailing detergents. Versatile: Ideal for wheels, door jambs, engine bays, and exterior paintwork washing and covering with foam. Specifications & Package Contents Capacity: 2000ml Included in the kit: 1x Foam nozzle 1x Emulsion nozzle 2x Spare rubber seals (green) 2x Spare foam filters (red) 1x User manual Directions for Use Fill: Mix your preferred cleaner and water according to the product's dilution ratio in the canister. Pressurize: Secure the lid. Use rapid strokes to pump the handle 35–50 times until you feel firm resistance. Apply: Spray evenly across the surface. Re-pump as needed to maintain consistent foam pressure. Care Instructions Rinse: After each use, empty the container and rinse thoroughly with clean water. Flush: Spray clean water through the nozzle to clear out any leftover chemical residue. Storage: Release internal pressure before storing. Store in a cool, dry place.

Lasīt vairāk mazāk

PLASH Dual-sided microfiber mitt for fast, streak-free glass cleaning. Waffle Side: Lifts and removes tough dirt, grease, and fingerprints. Smooth Side: Polishes glass dry for a completely clear, streak-free finish. Ergonomic Design: Easily cleans tight corners and hard-to-reach areas inside and outside the vehicle. Directions for Use Prep: Shake the Plash STIKLAM bottle. Apply Cleaner: For exterior glass, spray onto the surface and the mitt. For interior glass, spray directly onto the mitt only. Agitate: Clean the glass with the waffle side to loosen grease and grime. Dry: Wipe with the smooth side until the surface is completely dry. Care Instructions Machine wash at 30°C. Do not use bleach or fabric softener. Do not tumble dry. Air dry naturally.

Lasīt vairāk mazāk

PLASH wheel washing mitt - High-density (1400GSM) microfiber mitt for safe, precise manual wheel cleaning. Ergonomic Design: Finger loop secures the mitt to prevent slipping and reduce hand fatigue. Safe Surface Care: Thick, gentle fibers protect sensitive gloss and lacquered finishes. Versatile Application: Cleans wheels, door jambs, exhaust tips, and lower trim panels. Directions for Use Apply Cleaner: Spray Plash MAIGAIS onto the wheel and let dwell for 2 minutes. Foam and Agitate: Apply Plash SNIEGS foam and clean the surface with the mitt. Rinse: Thoroughly rinse the wheel with water. Clean Mitt: Rinse the mitt immediately after use and squeeze out excess water. Remove burnt in iron particles: apply Plash Niknais if red small dots still present on wheels, wait a few minutes and thoroughly rinse it off. Do not touch Niknais with mitt or hands.  Care Instructions Machine wash at 30-40°C using Plash MIKROŠĶIEDRĀM detergent. Do not use bleach or fabric softener. Do not iron, tumble dry, or place directly on radiators. Air dry only.

Lasīt vairāk mazāk

PLASH Microfiber wash mitt for safe, efficient manual contact washing. Long fibers pull dirt deep into the mitt, keeping only clean fibers against the paint to prevent scratching. Directions for Use Pre-Wash: Wash and rinse the vehicle to remove heavy dirt.Prep: Reapply foam. Submerge the wash mitt in a bucket of water mixed with car shampoo.Wash: Begin contact washing from the top of the vehicle, moving downward.Rinse Mitt: Periodically rinse the mitt in a separate bucket of clean water to remove trapped dirt.Final Rinse: Rinse the vehicle body thoroughly with water. Care Instructions Wash after each use at 30°C.Do not use fabric softener.Air dry naturally.

Lasīt vairāk mazāk

PLASH Interior Cleaning Scrub Dual-sided cleaning pad for vehicle interiors: Scrubbing Side: Brush-like fibers lift dirt from surface pores. Microfiber Side: Soft microfiber wipes away residue. Directions for Use Apply Cleaner: Spray a small amount of interior cleaner directly onto the pad. Agitate: Scrub the surface gently without applying heavy pressure. Wipe: Remove residue with the microfiber side or a separate microfiber towel. Neutralize: If excess cleaner was used, wipe the surface with a damp microfiber towel to remove remaining product. Care Instructions Hand wash or machine wash at 30°C. Do not use fabric softener.

Lasīt vairāk mazāk