Auto mazgāšana

TONYIN Wash & Wax Extreme Snow Foam – bottle – 473 ml – cuts through dirt and grime while adding a layer of wax protection during the wash. pH balanced: Safely cleans the vehicle without stripping or damaging any existing car waxes or sealants. Deep cleaning: Rapidly breaks down and lifts away tough road dirt, dust, and grime. Highly concentrated: Ultra-dilutable formula works at up to a 1:800 ratio for excellent efficiency and thick foam production. Gloss boost: Leaves a touch of wax behind to enhance shine and water-beading right after rinsing. TONYIN Wash & Wax Extreme Snow Foam directions for use Dilute: Mix the foam concentrate with water in a foam cannon bottle or a wash bucket. Use up to a 1:800 dilution ratio depending on the desired foam thickness. Foam: Spray the thick foam evenly over the entire cool vehicle surface, or apply using a soft wash mitt. Dwell: Let the foam sit on the paint for 1–2 minutes to loosen dirt. Do not let it dry on the surface. Rinse: Rinse the vehicle thoroughly with a high-pressure stream of clean water, then dry with a microfiber drying towel. TONYIN Wash & Wax Extreme Snow Foam product compatibility Safe for all exterior vehicle surfaces, including gloss paintwork, clear coats, glass, chrome, plastic trim, and wheels. Perfect for routine maintenance washes on vehicles protected by waxes, sealants, or ceramic coatings.

Lasīt vairāk mazāk

TONYIN Surface Prep Oil & Residue Remover – spray bottle – 473 ml– removes oil, grease, and old wax to prepare vehicle surfaces for ceramic coatings or sealants. Deep cleaning: Strips away old wax, polishing oils, and grease from vehicle surfaces. Perfect preparation: Prepares paint thoroughly before applying ceramic coatings or sealants to help them bond better and last longer. Quick flashing: Evaporates quickly to leave a completely clean, bare, and residue-free surface. TONYIN Surface Prep Oil & Residue Remover directions for use Spray: Mist the product directly onto a clean, dry microfiber towel or onto the vehicle panel. Wipe: Wipe the surface gently to dissolve and lift any leftover oils or polishing dust. Buff: Flip the towel or use a second dry microfiber towel to wipe the area completely dry. TONYIN Surface Prep Oil & Residue Remover product compatibility Safe for use on all exterior paintwork, glass, metal, and plastic trim before applying protective layers. Do not use on hot vehicle surfaces or in direct sunlight.

Lasīt vairāk mazāk

TONYIN Vanquished Water Spot Remover – spray bottle and concentrate canister – 473ml and 4L – removes water spots and mineral stains from vehicle surfaces. Concentrate does not come with a spray bottle. Removes water spots: Neutralizes and dissolves stubborn water stains on paint, glass, and metal for effortless removal. Restores smoothness: Clears away minor contaminants and mineral build-up to bring back a completely smooth surface feel. Prepares the surface: Cleans the paintwork thoroughly to prepare it for wax protection against future water spots. TONYIN Vanquished Water Spot Remover directions for use For the 473ml Ready-to-Use Spray: Apply: Spray the product directly onto the affected area or onto a microfiber towel. Wipe: Work the product gently over the water spots to lift the stains. Rinse: Rinse the area thoroughly with clean water. Do not allow the product to dry on the surface. Dry: Wipe the surface dry with a clean microfiber towel. For the 4L Concentrate Canister: Dilute: Mix the concentrate with water at a ratio of 1:3 to 1:5 in a separate spray bottle before application, depending on the severity of the stains. Test on a non-visible location. Mixing in different concentration or misuse may damage the paint. TONYIN Vanquished Water Spot Remover product compatibility Safe for use on exterior automotive paint, glass, and metal surfaces. Do not use on hot panels or in direct sunlight. Can reduce the duration of applied waxes and protective coatings.

Lasīt vairāk mazāk

TONYIN Tar Off Tar & Sticker Remover – spray bottle – 473 ml – lifts grease, tar, and stubborn contaminants from vehicle surfaces. 4 l package in plastic can, spray not included Powerful cleaning: Safely removes heavy grease, tar, asphalt, insects, tire marks, and glue residue. Surface safe: Dissolves tough sticky messes with no risk of damaging factory vehicle paint or clear coats. Flawless finish: Melts away contaminants to restore a completely clean and smooth surface. TONYIN Tar Off Tar & Sticker Remover directions for use Apply: Spray the product directly onto the surface or onto a microfiber towel. Dwell: Let it sit for 1–2 minutes to allow the formula to dissolve the tar or adhesive. Do not let it fully dry and do not use in direct sunlight. Wipe: Gently wipe away the melted residue with a clean microfiber cloth. Rinse: Wash or rinse the treated area thoroughly with car soap and water. TONYIN Tar Off Tar & Sticker Remover product compatibility & safety Safe for use on standard exterior vehicle paintwork, chrome, metal, and glass. Avoid using on delicate, unpainted plastics or fresh, uncured paint. Do not use in direct sunlight or on hot vehicle panels. Never let the product dry completely on the surface. Always wear personal protective equipment (PPE), including gloves and a mask, during application.

Lasīt vairāk mazāk

TONYIN Iron & Fallout Remover – spray bottle and canister – 473ml and 4 L – removes iron deposits and brake dust from wheels and paint to prevent rust and damage. Spray bottle not included with concentrate. Rust prevention: Helps stop rust and paint failure caused by embedded road iron and brake dust. Deep cleaning: Safely breaks down ferrous metallic contamination that normal washing leaves behind. Surface safe: Cleans wheels, glossy paint, clear coats, polished metal, and chrome without scratching. TONYIN Iron & Fallout Remover directions for use For Ready-to-Use (473ml spray / 3.785L canister): Spray: Mist the product directly onto a cool, dry surface. Dwell: Let it sit for 2–3 minutes to break down the metal particles. Rinse: Rinse the surface thoroughly with a strong stream of water. Do not let the product dry on the surface. Repeat: if some particles not reacting, agitate them with a solvent resistant detailing brush.  For the 1:20 Concentrate Canister: Dilute: Mix 1 part concentrate with 10-20 parts water in a separate spray bottle before application. TONYIN Iron & Fallout Remover product compatibility & safety Safe for use on automotive wheels, gloss paint, clear coat finishes, polished metal, and chrome. Warning: Use PPE (gloves, mask). May react with single-component coatings. Always test on a small, hidden area first if you are unsure about the type of paint or coating. Do not use in direct sunlight and do not let dry. 

Lasīt vairāk mazāk

PLASH Bug remover cleaner quickly dissolves bug residue from headlights, glass, mirrors, and bodywork. It removes sticky bugs easily without hard rubbing, stopping bug acids from causing permanent paint damage. Quick cleaning: Dissolves bug residue in 2 minutes for easy rinsing without scrubbing. Paint protection: Prevents scratches by lifting organic contaminants safely. Coating safe: Approved for cars with ceramic coatings, paint protection film (PPF), or wax. Capacity: 500ml. Directions for use Prep: Use right after a trip for best results. Make sure all surfaces are cool to the touch. If needed, cool the vehicle down with water first. Apply: Spray Plash KUKAIŅIEM directly onto bug-covered areas like the bumper, hood, lights, mirrors, and glass. Leave on surface: Let the product react for about 2 minutes. Do not let it dry on the surface. Rinse: Wash off thoroughly with a strong water stream. Repeat: Repeat the process if needed, then continue with your normal wash routine. Product details & safety Use with the included spray trigger. Wear protective gloves and shake the bottle well before use. Do not apply to hot surfaces or in direct sunlight. In warm weather, work in the shade and cool the bodywork with water until it is cold to the touch. Test on an inconspicuous area before first full use.

Lasīt vairāk mazāk

PLASH BITUMS Tar remover created to dissolve and safely remove bitumen, tar, sap, glue, and oil spots from vehicle surfaces. It removes sticky layers to restore paint shine and help water-repellent coatings work properly. Effective cleaning: Dissolves and removes bitumen, tar, sap, glue, and oil stains. Surface safe: Approved for bodywork, glass, plastic, and metal surfaces. Bundle items: Includes a 500ml bottle, a spray trigger, and one 300 GSM microfiber towel. Directions for use Wash: Wash the car completely with shampoo and a wash mitt. Wipe away excess water or let the surface dry. Apply: Ensure the vehicle is cool and dry. Spray the product onto the bodywork using the included trigger. Work in a shaded area. Leave on surface: Let the product react for 1–5 minutes. Do not allow it to dry on the paint. Wipe: Gently wipe the surface with the microfiber towel without pressing hard or scrubbing. Repeat if necessary. Rinse: Rinse the car thoroughly with water to remove all remaining product residue. Product details & safety Use only outdoors or in well-ventilated spaces. Do not apply to hot surfaces or in direct sunlight. Test on an inconspicuous area before first full use. Always wear protective gloves. Remove the spray trigger after use, screw the original cap back on, and store only in the original packaging.

Lasīt vairāk mazāk

PLASH MAIGAIS High-foaming wheel and tire shampoo created to clean daily dirt and deep deposits. It removes wheel yellowing, oily grime, and baked-on road dirt while remaining safe for surfaces. Wheel cleaning: Removes yellowing and baked-on road grime from wheels. Tire safe: Effectively cleans tire rubber without causing damage. Alkaline formula: High-foaming, alkaline composition that is gentle on surfaces. Capacity: 500ml. Directions for use Prep: Shake the bottle and spray the product evenly onto a completely cooled, pre-rinsed wheel which has tar and iron fallout removed prior to washing. Leave on surface: Let the product react for 1–2 minutes. Do not allow it to dry. Agitate: Clean the dirt using a wheel brush, detailing brush, or microfiber mitt. Use a separate mitt for wheels to avoid scratching the paintwork. Rinse: Rinse the wheel thoroughly with water to remove all product residue. Repeat: Clean each wheel one by one. Product details & safety Test on a less visible area before full application, especially on polished, chrome, anodized, or matte wheels. In hot weather, work in the shade and cool the wheels with water until they are cool to the touch before application. Clean each wheel individually; do not spray all wheels at the same time. Do not let the product dry on the surface. Wearing protective gloves is necessary. Store only in the original packaging.

Lasīt vairāk mazāk

PLASH NIKNAIS iron fallout remover is an effective, foaming product created to clean wheels and vehicle bodywork from brake dust and embedded metal particles. It chemically dissolves sharp iron contaminants and oxides to prevent rust formation and paint damage. Turns purple during the cleaning process. Brake dust removal: Cleans brake dust and iron particles from wheels and paint safely. Rust prevention: Eliminates metal contamination to stop rust spots before they form. Color indicator: Turns purple when reacting with iron particles to show the product is working. Surface safe: Safe for all wheel types and exterior vehicle surfaces. Capacity: 500ml. Directions for use Prep: Shake the bottle. Ensure the surfaces are cool to the touch. Spray Plash NIKNAIS evenly onto the wheels and bodywork. Leave on surface: Let the product react for 2–5 minutes. Do not allow it to dry. The liquid will turn purple as it dissolves the metal. Agitate: Use a detailing brush on wheels to foam up the product and clean deep into corners and crevices. Rinse: Rinse all surfaces thoroughly with a high-pressure washer. Do not leave any product residue behind. Repeat if necessary. Product details & safety Use with the included spray trigger. Recommended for use every 2–3 months as a final step in your wash routine. Do not apply to hot surfaces or in direct sunlight. Do not let the product dry on the vehicle. In warm weather, work in the shade and cool the surface with water before spraying. Wearing protective gloves is necessary. Test on a less visible area before first full use. Made only for metal particle removal. For full wheel detailing, use wheel shampoo for road grime and tar remover.

Lasīt vairāk mazāk

PLASH ATKUSNIS ice removing solution, glass cleaner created to melt ice from vehicle windows in seconds for clear driving visibility. It replaces the ice scraper to protect glass from scratches and helps prevent re-freezing. Regular use extends the lifespan of wiper blades and rubber seals. Ice melting: Melts ice on glass surfaces quickly in cold weather. Glycerin protection: Keeps wiper blades and rubber seals soft to prevent cracking and premature wear. Anti-freezing: Reduces the risk of repeated ice formation on the windows. Scent: Features a cinnamon aroma. Capacity: 500ml. Directions for use Prep: Shake the bottle well before use and turn the nozzle to the spray position. Apply: Spray the product evenly onto the frozen glass surface. Leave on surface: Let the product react for a brief moment. Clear: Remove the remaining ice residue with a snow brush or your vehicle wiper blades. Repeat: Reapply and repeat the process if dealing with thick ice layers. Product details & safety Application: Use with the included spray trigger. Keep out of reach of children.

Lasīt vairāk mazāk

Daily maintenance spray created to quickly clean light dirt from the vehicle body without a full wash. It evaporates quickly, leaves no streaks, and adds a light shine. Silicone-free. Light cleaning: Removes dust, water spots, and fresh bird droppings. Scratch protection: Lubricates the surface to reduce friction during wiping. Surface safe: Approved for use on all exterior body panels and wheels. Capacity: 500ml. Directions for removing light dirt Prep: Shake the bottle. Ensure the surface is cool and free of heavy dirt. Apply: Spray the product directly onto the surface or onto a microfiber towel. Wipe: Clean the area evenly with a microfiber towel. Buff: Flip the towel to a clean side and buff lightly to a dry finish. Directions for use as a drying aid Spray: Shake the bottle and spray a few bursts onto the wet vehicle panel. Dry: Place a drying towel on the surface and pull it smoothly across the panel. Touch up: Spray directly onto any missed water runs or spots, then wipe clean with a microfiber towel. Product details & safety Use with the included spray trigger. Do not apply to hot surfaces. Do not use on heavily soiled vehicles without a prior wash.

Lasīt vairāk mazāk

PLASH SNIEGS Concentrated foam product made to create thick, long-lasting foam. It also acts as a slick car shampoo created for safe manual washing with a microfiber mitt to prevent scratches. Thick foam: Creates a stable, slick layer for safe vehicle washing. pH neutral: Safe for all surfaces and protective coatings. Versatile use: Perfect as both a pre-wash snow foam and a standard car shampoo. Volume: 1000ml capacity. Directions for use Pre-wash: If the vehicle has not been washed for over a week, pre-wash with specialized pre-wash solutions first. Prep sprayer: Mix Plash SNIEGS with water at a 1:10 ratio (100ml product to 1000ml water) in the Plash foam sprayer. Do not exceed 1500ml total liquid volume. Close tightly and use the foam nozzle. Apply: Pump the handle 35–50 times, shake the sprayer, and apply foam evenly over the vehicle. Prep bucket: Fill a bucket with water and add 50–70ml of Plash SNIEGS per 10L of water. Insert the microfiber mitt and use a water stream to build foam. Contact wash: If pre-washed: Wash immediately with a microfiber mitt using straight lines from top to bottom. Rinse the mitt regularly in clean water. If not pre-washed: Rinse the vehicle, apply a new layer of foam, and then wash. Rinse: Do not allow the foam to dry on the surface. Rinse the vehicle body thoroughly. Care & safety instructions Wear protective gloves and shake the bottle thoroughly before use. Ensure the vehicle body and hood are cool to the touch. In warm weather, work in the shade and cool the surface with water before application. Do not apply on hot surfaces or allow the product to dry. Foam sprayer dilution: 1:10. Bucket dilution: 1:140 to 1:200.

Lasīt vairāk mazāk

Pre-wash concentrate created to prepare vehicle bodywork for more effective foam action. Plastic bottle, 1l package. Concentrated formula: Dilute at a 1:10 ratio (e.g., 100ml product to 1000ml water). Surface safe: Safe for use on all exterior vehicle parts. Application compatibility: Made for use with the Plash foam sprayer emulsion nozzle. Directions for use Rinse: Rinse the vehicle with water first. Prep sprayer: Mix Plash STARTS with water at a 1:10 ratio in the Plash foam sprayer. Do not exceed 1500ml total liquid volume for maximum efficiency. Close tightly and install the emulsion nozzle. Apply: Pump the handle 35–50 times, shake the sprayer, and apply evenly to all vehicle surfaces. Dwell: Let the product react for 1–2 minutes. Apply Car Shampoo foam directly on top to keep the surface wet and boost the pre-wash effect. Rinse: Rinse thoroughly with a strong water stream, starting with the dirtiest areas. Contact wash: Apply Car Shampoo foam to the car again. Afterwards perform a manual contact wash using a car shampoo & microfiber mitt.

Lasīt vairāk mazāk

PLASH TURBO is a powerful, alkaline-formula pre-wash designed for deep cleaning vehicle bodywork - 1l plastic bottle package. Formulated for demanding conditions to quickly dissolve road salt, oil, grease, bugs, and stubborn grime. Alkaline formula: Dissolves heavy road film and organic contaminants efficiently. Deep cleaning action: Lifts baked-on grime and winter salts. Fast results: Minimizes manual scrubbing by loosening dirt before the contact wash. Directions for use Dilute: Mix the concentrate with water at a 1:10 ratio. The bottle is sufficient for 5–8 washes. Apply: Spray the solution evenly onto the dry vehicle surface, starting from the bottom and working upward. Dwell: Allow the product to react for a few minutes. Do not let it dry on the surface. Rinse: Rinse the vehicle thoroughly with a high-pressure washer, moving from the bottom up. Care & safety instructions Do not apply on hot surfaces or in direct sunlight. Do not allow the product to dry on the paintwork. Test on an inconspicuous area before applying to sensitive finishes or chrome trim. Keep out of reach of children.

Lasīt vairāk mazāk

KochChemie ReactiveWheelCleaner ir automašīnu disku tīrīšanas līdzeklis augstas kvalitātes disku rūpīgai tīrīšanai. Nesatur skābes. 750 ml smidzināšanas pudele. Spēcīgs netīrumu tīrīšanas līdzeklis izšķīdina spītīgus netīrumus. Piemīt spīdums un lotosa (ūdeni atgrūdoša) iedarbība. Pārbaudiet neuzkrītošā vietā. Izsmidziniet un atstājiet iedarboties 1-3 minūtes. Ja līdzeklis īsā laikā neiedarbojas, to var atstāt iedarboties līdz 10 minūtēm. Pēc tam noskalot ar augstspiediena ūdens strūklu. KochChemie ReactiveWheelCleaner produkta apraksts angļu valodā KochChemie ReactiveWheelCleaner drošības datu lapa

Lasīt vairāk mazāk

KochChemie OP Orange Power ir ātras iedarbības, lēni iztvaikojošs speciāls produkts, kura pamatā ir dabīgi apelsīnu ekstrakti. Plastmasas pudele, 1 kg. Noņem līmes atlikumus, piemēram, emblēmu līmi, no transportlīdzekļiem un šķīdinātājiem izturīgām virsmām. Noņem arī gumijas un sveķu atlikumus, koku sulu, tintes traipus, eļļu, taukus, darvu un košļājamo gumiju utt. Var lietot uz citām šķīdinātājiem izturīgām virsmām, piemēram, krāsas, stikla, keramikas, metāla utt. Orange Power ir patīkams lietošanā un piemērots arī lietošanai iekštelpās, pateicoties tā svaigajam apelsīnu aromātam. Pirms lietošanas pārbaudiet uz slēptas virsmas daļas. KochChemie Op Orange Power produkta apraksts angļu valodā KochChemie Op Orange Power drošības datu lapa

Lasīt vairāk mazāk

KochChemie MP Motorplast ir spīdīgs, ūdeni atgrūdošs konservants motortelpas detaļām, gumijas šļūtenēm ar patīkamu aromātu. 500 ml iepakojums ar smidzinātāju. Apstrādātās detaļas atgūst jaunu izskatu. Lielāks pasūtījums caur e-pastu - 5 litru iepakojums kannā. Pilnīga izžūšana samazina netīrumu pielipšanu. Pastāvīgi elastīgā aizsargplēve aizsargā agregātus no korozijas un vides ietekmes. Piemērots lietošanai uz sausām un mitrām virsmām. Temperatūras izturība līdz 250 °C. Ar Daimler atzinumu. Koch Chemie MP Motorplast produkta informācija angļu valodā Koch Chemie MP Motorplast drošības datu lapa

Lasīt vairāk mazāk

KochChemie Insect & DirtRemover kukaiņu un netīrumu tīrītājs noņem pat visnoturīgākos netīrumus un traipus no beigtiem kukaiņiem. 750 ml smidzināšanas pudele. Noņem arī eļļu un citus vides netīrumus no transportlīdzekļa virsbūves. Augstas kvalitātes sastāvdaļas iesūcas netīrumos un nodrošina ātru un saudzīgu tīrīšanu. KochChemie kukaiņu un netīrumu noņemšanas līdzekļa produkta apraksts angļu valodā KochChemie Insect & DirtRemover drošības datu lapa

Lasīt vairāk mazāk

KochChemie CES Ceramic Effect šampūns ir kopjošs šampūns roku mazgāšanai ar sūkli. 1 l pudele. Tas attīra un papildus ilgstoši aizsargā virsmas tikai vienā solī. Rada gludu, taustei mīkstu un ļoti hidrofobu virsmu ar ļoti labu dziļu spīdumu. Atšķaidiet šampūnu roku mazgāšanai mazgāšanas spainī proporcijā 1:200 (50 ml uz 10 l ūdens). Ātri un viegli lietojamais šampūns ir ideāli piemērots virsmām, kas jau ir pārklātas ar keramiku vai aizsargvasku, un pagarina attiecīgā pārklājuma kalpošanas laiku. Ar patīkami svaigu ogu-mandeļu aromātu. Nelietojiet PIRMS keramikas pārklājuma vai vaska uzklāšanas. KochChemie CES pilns produkta apraksts angļu valodā KochChemie CES tehnisko datu lapa

Lasīt vairāk mazāk

KochChemie PSS Plast Star Silicone free ir plastmasas kopšanas līdzeklis bez silikona eļļas. Tas saglabā un aizsargā vairākus mēnešus un ir izturīgs pret UV starojumu. 1 l pudele. Apstrādātās detaļas atgūst savu sākotnējo jauno, pusmatēto izskatu, pateicoties īpašai kopšanas komponentu sistēmai (mikroemulsijai), kas cieši saistās ar apstrādāto virsmu. Novērš durvju blīvējumu sasalšanu. Optimāli piemērots arī riepām un gumijas detaļām. KochChemie PSS Plast Star produkta apraksts angļu valodā KochChemie PSS Plast Star drošības datu lapa

Lasīt vairāk mazāk

KochChemie Eulex līmes noņēmējs līmju, uzlīmju atlikumu, gumijas, koku sveķu, aerosola miglas, tintes traipu, eļļas, tauku u.c. noņemšanai. 1 l pudele. Lietojams uz šķīdinātājiem izturīgām virsmām, piemēram, krāsas, stikla, keramikas, metāla un citām virsmām. Ātri iztvaiko un neatstāj atlikumus. KochChemie Eu Eulex produkta apraksts angļu valodā KochChemie Eu Eulex drošības datu lapa

Lasīt vairāk mazāk

KochChemie RRR Reactive Rust Remover ir pH neitrāls tīrīšanas līdzeklis. Noņem virsmas rūsu, metāla daļiņas, piedegušus bremžu putekļus un neorganiskus netīrumus. Pieejams 500 ml pudelē, lielāks iepakojums (11 kg) pieejams, sazinoties ar mums pa e-pastu.  Sastāvdaļas ir saskaņotas ilgākam reakcijas/mitrināšanas laikam, lai varētu efektīvi izšķīdināt spītīgus traipus un piedegušas daļiņas. Pēc netīrumu izšķīšanas tīrīšanas līdzeklis iegūst violetu krāsu. Formulā esošās īpašās virsmaktīvās vielas pārklāj un izkliedē daļēji izšķīdinātos netīrumus, padarot to viegli noskalojamu. Pārbaudiet produkta saderību ar jutīgām virsmām, piemēram, pulētu alumīniju, neuzkrītošā vietā. Izsmidziniet neatšķaidītu produktu uz virsmas un ļaujiet tam iedarboties trīs līdz sešas minūtes. Ja nepieciešams, iestrādājiet ar otu vai sūkli. Rūpīgi noskalojiet. Nelietojiet uz karstām virsmām. Neļaujiet nožūt. Lietojiet personīgās drošības ekipējumu. Koch Chemie RRR reaktīvais rūsas noņēmējs (RRR Reactive Rust Remover) — produkta informācija angļu valodā Koch Chemie RRR reaktīvais rūsas noņēmējs Drošības datu lapa

Lasīt vairāk mazāk

KochChemie TEA darvas un bitumena noņēmējs tīrīšanai no šķīdinātājiem izturīgām virsmām, piemēram, krāsas, stikla, keramikas, metāla, tostarp automašīnām, komerctransportam, automazgātavu birstēm, darbnīcu grīdām, mašīnām utt. KochChemie tea produkta apraksts angļu valodā KochChemie tea drošības datu lapa

Lasīt vairāk mazāk

KochChemie AS auto šampūns ar pH 9, kas ir fosfātu un NTA nesaturošs auto šampūns mazgāšanai automazgātavā, ar putu ģeneratoru vai manuāli, 1 l iepakojumā. Anjonu un nejonu virsmaktīvo vielu kombinācija garantē maigu un rūpīgu tīrīšanu. Optimāli piemērots arī bioloģiskajām tehniskajām ūdens attīrīšanas iekārtām. KochChemie AS autošampūna pilns produkta apraksts angļu valodā KochChemie AS Autoshampoo tehnisko datu lapa

Lasīt vairāk mazāk