Eksterjera detailings

TONYIN Protego PPF & Vinyl Wrap Ceramic Coating, bottle, 30ml, protects vinyl wraps and paint protection films from sun damage and stains. UV resistance: Blocks sun rays to prevent the wrap or film from fading and aging. Weather defense: Protects surfaces against acid rain and environmental stains. Longer lifespan: Extends the life of the film and simplifies routine maintenance. TONYIN Protego PPF & Vinyl Wrap Ceramic Coating directions for use Clean: Wash the film surface, then clean it with a degreaser to ensure it is clean and dry. Apply: Spread the coating evenly section by section. For large areas like the hood, divide the panel into four parts and work on one part at a time. Wipe: Let the product sit for 1–2 minutes, then wipe the surface with a clean, dry microfiber cloth. Cure: Allow 12 hours of curing time. For best results, apply a second layer after 2 hours of drying time. TONYIN Protego PPF & Vinyl Wrap Ceramic Coating product compatibility & safety Safe for use on porous surfaces of vinyl wraps and paint protection films (PPF). Do not wet or touch the treated surface within 24 hours of application. Do not wash the car for 7 days to allow the coating to reach maximum hardness.

Lasīt vairāk mazāk

TONYIN Guardian Chrome & Metal Ceramic Coating, bottle, 50ml, protects polished metal and chrome surfaces from stains and rust. Surface protection: Blocks salt and water from penetrating the surface to prevent rust and corrosion. Stain defense: Helps protect against fingerprints and water spots. Self-cleaning: Uses self-cleaning properties to make routine maintenance easy. Maintains shine: Keeps the original reflective sparkle and shine of the metal over time. TONYIN Guardian Chrome & Metal Ceramic Coating directions for use Clean: Clean and dry the metal surface before starting. Apply: Pour a few drops of the coating onto an applicator block and spread it evenly over the surface. Dry: Do not wipe the surface with a microfiber cloth. Let the coating air-dry. Cure: Do not wet or touch the surface until it fully dries.  TONYIN Guardian Chrome & Metal Ceramic Coating product compatibility Safe for use on chrome, polished aluminum, stainless steel, brass, and other bare metal surfaces. Do not apply on hot surfaces or in direct sunlight.

Lasīt vairāk mazāk

TONYIN Clarity Ceramic Window Coating, bottle, 30ml, protects glass surfaces and improves wet weather visibility. Water repellent: Repels rain to improve visibility and driving safety during wet weather. Prevents spots: Stops water spots and mineral stains from forming on the glass. Wiper performance: Reduces friction to help wiper blades move smoothly across the windshield. Nanotech layer: Uses nanotechnology to bond with the glass for long-lasting protection. TONYIN Clarity Ceramic Window Coating directions for use Prep: Wash, dry, and degrease the glass surface to remove all oils and residue. Apply: Pour a few drops onto an applicator pad and spread the liquid evenly across the glass. Wipe: Wait 1–3 minutes, then wipe the surface clean with a microfiber cloth. Cure: Keep the glass dry and away from water for 12 hours. Do not wash the vehicle with chemicals for 7 days. TONYIN Clarity Ceramic Window Coating product compatibility Safe for use on all automotive glass surfaces, including windshields, side windows, rear windows, and exterior mirrors. Do not apply on hot glass or in direct sunlight.

Lasīt vairāk mazāk

TONYIN Renew Ceramic Plastic Coating, bottle, 50ml, restores and protects faded unpainted plastic trim. Color restoration: Restores faded exterior and interior plastic parts back to their original rich, deep color. Deep bonding: Penetrates and bonds directly into the pores of unpainted plastic for long-lasting durability. Ceramic layer: Forms a tough ceramic coating on the surface to protect against weather and washing. Sun protection: Blocks harmful rays to stop plastic trim from fading, cracking, or whitening in the future. TONYIN Renew Ceramic Plastic Coating directions for use Clean: Wash and deep-clean the plastic trim to remove all dirt, grease, and old dressings, then dry it completely. Prep: Wipe the plastic with an alcohol prep spray to ensure the surface is fully bare and free of oils. Apply: Pour a few drops of the coating onto an applicator pad or cloth. Wipe it evenly across the plastic surface, working in small sections. Wipe: Let the product sit for 1–2 minutes, then gently wipe away any excess liquid with a clean, dry microfiber towel to ensure a smooth finish. Cure: Allow the coating to cure for at least 24 hours. Keep the vehicle dry and away from water during this time. TONYIN Renew Ceramic Plastic Coating product compatibility Safe for use on all unpainted exterior and interior plastic trim, textured bumpers, side moldings, and rubber seals. Do not use on painted plastic panels, smooth gloss plastics, or clear plastic surfaces like headlights. Do not apply to hot surfaces or in direct sunlight.

Lasīt vairāk mazāk

TONYIN TS Shield Wheel & Caliper Ceramic Coating, bottle, 30ml, protects wheels and brake calipers from high-temperature brake dust and chemical damage. Heat resistance: Resists high-temperature brake dust, light scratches, and harsh cleaning chemicals. Durable protection: Provides a long-lasting, tough protective barrier designed specifically for the harsh environment of wheels and brakes. Easy cleaning: Makes future wheel washing quick and easy without the need for aggressive scrubbing or acid-based cleaners. Long-term defense: Locks in a slick finish that prevents road grime and brake dust from embedding into the surface. TONYIN TS Shield Wheel & Caliper Ceramic Coating directions for use Clean: Wash and deep-clean the wheels and brake calipers to remove all brake dust, grease, and iron deposits, then dry them completely. Prep: Wipe the surfaces down with an alcohol-based prep spray to remove any remaining oils or polish residue. Apply: Pour a few drops of the coating onto a suede cloth wrapped around an applicator block. Spread the liquid evenly over the wheel face, spokes, and calipers. Wipe: Allow the product to flash (usually 1–2 minutes), then buff the surface gently with a clean microfiber towel to remove excess residue. Cure: Let the coating cure for at least 24 hours. Keep the wheels completely dry and away from water during this time. TONYIN TS Shield Wheel & Caliper Ceramic Coating product compatibility Safe for all types of automotive wheels, including painted, alloy, chrome, powder-coated, and clear-coated finishes. Safe for painted and bare metal brake calipers. Do not apply to hot wheels, warm brakes, or in direct sunlight.

Lasīt vairāk mazāk

TONYIN T5 Graphene 9H PRO Ceramic Coating, bottle, 50ml, provides extreme durability and professional-grade paint protection. Professional grade: Built as an ultra-durable paint protection layer specifically for professional detailing installers. Graphene technology: Uses a graphene-ceramic structure to deliver defense against scratches and chemical stains. Locks in shine: Seals the paintwork to maintain a deep, glossy, and clean finish for a long time. Weather shield: Protects the vehicle from sun fading, oxidation, and everyday road grime. TONYIN T5 Graphene 9H PRO Ceramic Coating directions for use Wash: Wash and dry the vehicle completely before starting. Prep: Polish the paint to remove any imperfections. Wipe the panels down with a surface prep spray to remove all oils and residue. Apply: Pour a few drops of the coating onto a suede cloth wrapped around an applicator pad. Spread the product evenly across a small section using overlapping straight lines. Wipe: Wait for the product to flash, then wipe away the residue gently with a clean microfiber towel. Buff the area with a second dry towel for a perfect finish. Cure: Allow the coating to cure for at least 24 hours. Keep the vehicle away from water and moisture during this time. TONYIN T5 Graphene 9H PRO Ceramic Coating product compatibility Formulated for professional and experienced ceramic coating applicators. Safe for all automotive gloss paint and clear coat finishes. Do not apply on hot surfaces or in direct sunlight.

Lasīt vairāk mazāk

TONYIN T3 Serum 9H Ultra Ceramic Coating, bottle, 50ml, seals and protects vehicle paintwork from scratches and chemical damage. Advanced protection: Outperforms standard ceramic coatings by forming a tough barrier resistant to scratches and chemical stains. Easy maintenance: Super water-repellent formula stops dirt from sticking, allowing you to clean the car easily with water and a soft cloth. Weather defense: Shields paint from UV rays, oxidation, and harsh weather. TONYIN T3 Serum 9H Ultra Ceramic Coating directions for use Wash: Wash your car thoroughly before starting the application. Prep: Perform a complete paint correction using compounds and polishes to clear away scratches. Clean the surface with an alcohol prep spray to ensure the paint is fully bare and dry. Apply: Apply the coating evenly, working on one small section at a time. Inspect the panel as you work and level any uneven spots immediately. Wipe: Wipe the surface with a clean microfiber cloth after 1 minute. Always wipe before the residue becomes sticky or hard to remove. Cure: Allow the coating to cure completely for 24 hours. For maximum protection, apply a second layer after 2 hours of drying time. TONYIN T3 Serum 9H Ultra Ceramic Coating product compatibility Safe for use on all automotive gloss paint and clear coat finishes. Do not apply in direct sunlight or on hot vehicle panels. Keep the vehicle completely dry for at least 24 hours after application.

Lasīt vairāk mazāk

TONYIN T1 Quartz 9H Ceramic Coating, bottle 30ml - protects vehicle surfaces from chemical and UV damage while enhancing paint depth and clarity. Quartz protection: Uses a quartz-based formula to form a hard layer over your car's paint. Weather defense: Protects surfaces from sun fading (UV degradation) and road chemicals. Gloss boost: Deepens paint color and adds high clarity and shine. Great for beginners: Easy-to-use formula that is perfect for any installer wanting to try ceramic coatings. TONYIN T1 Quartz 9H Ceramic Coating directions for use Prep: Wash, dry, and polish the car. Wipe the paint with a surface prep cleaner to remove all oils. Apply: Wrap a suede cloth around an applicator pad. Pour a few drops of the coating onto the cloth and spread it evenly in straight lines across a small section. Flash: Let the product sit for 1–3 minutes until it flashes (looks slightly rainbow or beads up). Buff: Wipe the area gently with a clean microfiber towel to remove residue, then buff with a second clean towel for maximum shine. TONYIN T1 Quartz 9H Ceramic Coating product compatibility Safe for use on all automotive gloss paint and clear coat finishes. Do not apply in direct sunlight or on hot vehicle panels. Keep the vehicle dry and away from water for at least 24 hours after application to let the coating cure properly.

Lasīt vairāk mazāk

TONYIN Ceramic Coating Applicator Pad - applies ceramic coatings smoothly and evenly onto vehicle surfaces. Dual-sided design: Features a firm blue high-density foam side for a steady grip and a soft black foam side for smooth product application. Durable quality: Made from high-quality materials built to last through detailing jobs. TONYIN Ceramic Coating Applicator Pad product compatibility Designed specifically for applying quartz, graphene, glass, and liquid ceramic coatings. Safe for use on exterior paintwork, clear coats, plastic trim, glass, and wheels. Depending on the material you are applying can be paired with a proper coating application cloth.

Lasīt vairāk mazāk

TONYIN foam pads wax applicator - a high-quality sponge that is wear-resistant, durable, easy to wipe clean, and leaves no residue. The outer yellow part is made of high-quality velvet, the inner part is made of ultra-soft sponge, the texture is soft and delicate.

Lasīt vairāk mazāk

TONYIN Wash & Wax Extreme Snow Foam – bottle – 473 ml – cuts through dirt and grime while adding a layer of wax protection during the wash. pH balanced: Safely cleans the vehicle without stripping or damaging any existing car waxes or sealants. Deep cleaning: Rapidly breaks down and lifts away tough road dirt, dust, and grime. Highly concentrated: Ultra-dilutable formula works at up to a 1:800 ratio for excellent efficiency and thick foam production. Gloss boost: Leaves a touch of wax behind to enhance shine and water-beading right after rinsing. TONYIN Wash & Wax Extreme Snow Foam directions for use Dilute: Mix the foam concentrate with water in a foam cannon bottle or a wash bucket. Use up to a 1:800 dilution ratio depending on the desired foam thickness. Foam: Spray the thick foam evenly over the entire cool vehicle surface, or apply using a soft wash mitt. Dwell: Let the foam sit on the paint for 1–2 minutes to loosen dirt. Do not let it dry on the surface. Rinse: Rinse the vehicle thoroughly with a high-pressure stream of clean water, then dry with a microfiber drying towel. TONYIN Wash & Wax Extreme Snow Foam product compatibility Safe for all exterior vehicle surfaces, including gloss paintwork, clear coats, glass, chrome, plastic trim, and wheels. Perfect for routine maintenance washes on vehicles protected by waxes, sealants, or ceramic coatings.

Lasīt vairāk mazāk

TONYIN Surface Prep Oil & Residue Remover – spray bottle – 473 ml– removes oil, grease, and old wax to prepare vehicle surfaces for ceramic coatings or sealants. Deep cleaning: Strips away old wax, polishing oils, and grease from vehicle surfaces. Perfect preparation: Prepares paint thoroughly before applying ceramic coatings or sealants to help them bond better and last longer. Quick flashing: Evaporates quickly to leave a completely clean, bare, and residue-free surface. TONYIN Surface Prep Oil & Residue Remover directions for use Spray: Mist the product directly onto a clean, dry microfiber towel or onto the vehicle panel. Wipe: Wipe the surface gently to dissolve and lift any leftover oils or polishing dust. Buff: Flip the towel or use a second dry microfiber towel to wipe the area completely dry. TONYIN Surface Prep Oil & Residue Remover product compatibility Safe for use on all exterior paintwork, glass, metal, and plastic trim before applying protective layers. Do not use on hot vehicle surfaces or in direct sunlight.

Lasīt vairāk mazāk

TONYIN Vanquished Water Spot Remover – spray bottle and concentrate canister – 473ml and 4L – removes water spots and mineral stains from vehicle surfaces. Concentrate does not come with a spray bottle. Removes water spots: Neutralizes and dissolves stubborn water stains on paint, glass, and metal for effortless removal. Restores smoothness: Clears away minor contaminants and mineral build-up to bring back a completely smooth surface feel. Prepares the surface: Cleans the paintwork thoroughly to prepare it for wax protection against future water spots. TONYIN Vanquished Water Spot Remover directions for use For the 473ml Ready-to-Use Spray: Apply: Spray the product directly onto the affected area or onto a microfiber towel. Wipe: Work the product gently over the water spots to lift the stains. Rinse: Rinse the area thoroughly with clean water. Do not allow the product to dry on the surface. Dry: Wipe the surface dry with a clean microfiber towel. For the 4L Concentrate Canister: Dilute: Mix the concentrate with water at a ratio of 1:3 to 1:5 in a separate spray bottle before application, depending on the severity of the stains. Test on a non-visible location. Mixing in different concentration or misuse may damage the paint. TONYIN Vanquished Water Spot Remover product compatibility Safe for use on exterior automotive paint, glass, and metal surfaces. Do not use on hot panels or in direct sunlight. Can reduce the duration of applied waxes and protective coatings.

Lasīt vairāk mazāk

TONYIN Tar Off Tar & Sticker Remover – spray bottle – 473 ml – lifts grease, tar, and stubborn contaminants from vehicle surfaces. 4 l package in plastic can, spray not included Powerful cleaning: Safely removes heavy grease, tar, asphalt, insects, tire marks, and glue residue. Surface safe: Dissolves tough sticky messes with no risk of damaging factory vehicle paint or clear coats. Flawless finish: Melts away contaminants to restore a completely clean and smooth surface. TONYIN Tar Off Tar & Sticker Remover directions for use Apply: Spray the product directly onto the surface or onto a microfiber towel. Dwell: Let it sit for 1–2 minutes to allow the formula to dissolve the tar or adhesive. Do not let it fully dry and do not use in direct sunlight. Wipe: Gently wipe away the melted residue with a clean microfiber cloth. Rinse: Wash or rinse the treated area thoroughly with car soap and water. TONYIN Tar Off Tar & Sticker Remover product compatibility & safety Safe for use on standard exterior vehicle paintwork, chrome, metal, and glass. Avoid using on delicate, unpainted plastics or fresh, uncured paint. Do not use in direct sunlight or on hot vehicle panels. Never let the product dry completely on the surface. Always wear personal protective equipment (PPE), including gloves and a mask, during application.

Lasīt vairāk mazāk

TONYIN Iron & Fallout Remover – spray bottle and canister – 473ml and 4 L – removes iron deposits and brake dust from wheels and paint to prevent rust and damage. Spray bottle not included with concentrate. Rust prevention: Helps stop rust and paint failure caused by embedded road iron and brake dust. Deep cleaning: Safely breaks down ferrous metallic contamination that normal washing leaves behind. Surface safe: Cleans wheels, glossy paint, clear coats, polished metal, and chrome without scratching. TONYIN Iron & Fallout Remover directions for use For Ready-to-Use (473ml spray / 3.785L canister): Spray: Mist the product directly onto a cool, dry surface. Dwell: Let it sit for 2–3 minutes to break down the metal particles. Rinse: Rinse the surface thoroughly with a strong stream of water. Do not let the product dry on the surface. Repeat: if some particles not reacting, agitate them with a solvent resistant detailing brush.  For the 1:20 Concentrate Canister: Dilute: Mix 1 part concentrate with 10-20 parts water in a separate spray bottle before application. TONYIN Iron & Fallout Remover product compatibility & safety Safe for use on automotive wheels, gloss paint, clear coat finishes, polished metal, and chrome. Warning: Use PPE (gloves, mask). May react with single-component coatings. Always test on a small, hidden area first if you are unsure about the type of paint or coating. Do not use in direct sunlight and do not let dry. 

Lasīt vairāk mazāk

TONYIN Streak Free Premium Glass Cleaner – spray bottle and concentrate canister – 473ml and 4L – removes dirt, dust, and grease from vehicle windows and glass for a streak-free shine. Concentrate does not have a spray bottle included. Streak-free clarity: Leaves windows and glass crystal clear with no leftover film or residue. Powerful cleaning: Quickly cuts through tough dirt, dust, fingerprints, grease, oil, and road grime. Safer driving: Improves glass clarity and night visibility for safer driving conditions. TONYIN Streak Free Premium Glass Cleaner directions for use For the 473ml Ready-to-Use Spray: Spray: Mist the cleaner lightly onto the glass surface or directly onto a microfiber glass cleaning towel (if interior glass, suggested to spray on towel to avoid overspray and spotting on panels). Wipe: Spread the cleaner across the glass to lift away dirt and grease. Buff: Flip the towel to a clean, dry side and buff the glass to a completely clear finish. For the 4L Concentrate Canister: Dilute: Mix the concentrate with water at a ratio of 1:5 to 1:20 depending on how dirty the glass is, then pour into a spray bottle. TONYIN Streak Free Premium Glass Cleaner product compatibility Safe for use on all automotive glass, windshields, side mirrors, and rearview mirrors. Suitable for both exterior and interior glass surfaces.

Lasīt vairāk mazāk

TONYIN car drying towel 1200 GSM – towel – 60x90 cm – dries vehicle surfaces quickly and safely without leaving lint or streaks. Maximum absorption: Built with a heavy 1200 GSM double-layer plush microfiber material to hold large amounts of water. Flawless finish: Dries completely lint-free and streak-free on both paintwork and glass. Large coverage: Measures 60x90 cm to dry entire body panels efficiently. Paint safe: Features soft, plush fibers that prevent scratching on delicate clear coats. TONYIN car drying towel 1200 GSM directions for use Spread: Lay the dry towel flat across the wet vehicle surface. Pull: Gently pull the towel toward you by its corners, allowing its weight to absorb the surface water. Air dry: Let it dry while hanging, Do not twist to dry and remove excess water. Care: Wash the towel after use with a dedicated microfiber cleaner without fabric softeners, then hang to dry.

Lasīt vairāk mazāk

Tonyin Ceramic Crystal liquid wax – bottle – 473ml – shines and protects vehicle paint with a high SiO2 concentration. Armor-like protection: Shines and shields your paintwork against environmental elements. Also works as a ceramic boost to refresh and maintain existing coatings. SiO2 infused: Powered by a liquified SiO2 formula for durable protection and gloss. Tonyin Ceramic Crystal liquid wax product compatibility Works perfectly as a standalone protection product or as a maintenance top-up for existing ceramic coatings. Apply with either dense microfiber or applicator, and remove with clean microfiber tower.

Lasīt vairāk mazāk

Graphene-infused paste wax that acts as a stronger version of traditional ceramic wax. It restores surfaces to deliver maximum gloss, slickness, and extreme water repellency. 200 gram package. Long-lasting protection: Shields surfaces for 8–12 months. High performance: Delivers deep gloss, slickness, and super water-beading properties. Easy application: Engineered for an easy-on and easy-off process. Versatile use: Restores and protects cars, boats, motorcycles, and RVs. Tonyin Graphene Coating Wax directions for use Wash: Wash and dry the vehicle completely. Apply: Dampen the special applicator pad. Apply the product using circular motions, working on one section at a time. Haze: Allow the wax to dry to a haze on the surface. Wipe: Remove the residue with a clean, soft microfiber cloth, turning it frequently. Buff: Buff the surface lightly to achieve maximum shine. Tonyin Graphene Coating Wax product compatibility & safety For best results, avoid direct sunlight and ensure the vehicle surface is cool to the touch before application. Not recommended for use on vinyl tops, metalized plastic trim, decals, flat black (matte) paint, simulated wood panels, or cracked/crazed paint finishes.

Lasīt vairāk mazāk

High-gloss protective spray wax infused with carnauba wax and silicones. Delivers a deep, wet shine and maximum surface slickness in seconds. 473ml spray bottle. Versatile protection: Works as a standalone protective layer or as a top-up booster for existing ceramic coatings, sealants, and waxes. No white residue: Safe for smooth or textured exterior plastics, bumpers, interior vinyl, and dashboards without leaving white stains. Hydrophobic: Boosts hydrophobic water-beading performance immediately. Durability: Protects surfaces for 6–8 weeks. Wet or dry application: Dries and shines clean, wet surfaces in a single step. TONYIN Ceramic Crystal spray wax use Apply: Spray the wax directly onto the vehicle surface or onto a microfiber cloth. Spread: Wipe the product evenly over the desired area. Buff: Flip the microfiber cloth to a clean, dry side and effortlessly buff away any remaining residue.

Lasīt vairāk mazāk

Kovax Tolecut dry sanding sheets dry sanding sheets that remove dust nibs, paint runs, and surface imperfections quickly and safely without the risk of oversanding. One sheet 70 x 114 mm. From K800 to K3000. One sheet contains 8 pieces of 29x35mm. Dry sanding: Allows you to monitor your progress in real-time for maximum control. Grit range: Available from K800 to K3000. Anti-clogging: Uses anti-clogging technology to prevent dust build-up.

Lasīt vairāk mazāk

Plash cordless mini polisher kit Mini cordless polisher kit switches between rotary and dual-action movements for precise detailing in tight spaces. Dual function: Runs as both a rotary and a dual-action (eccentric) polisher. Backing pads: Includes 30mm (1.2 inch) and 50mm (2 inch) backing pads with an M6 thread. Complete pad set: Comes with 3 hard, 3 medium, and 3 soft foam pads, plus 2 wool and 2 hybrid wool pads for each backing pad size. Variable speed: Adjusts from 1000 to 5000 RPM. Battery & power specifications Voltage: 12V Power output: 300W Continuous workflow: Includes two 12V, 2000 mAh batteries. You can remove one to charge it while working with the other. Battery life: Runs for about 45 minutes depending on the attachment. Charging time: Recharges fully in 30 to 45 minutes.

Lasīt vairāk mazāk

PLASH Bug remover cleaner quickly dissolves bug residue from headlights, glass, mirrors, and bodywork. It removes sticky bugs easily without hard rubbing, stopping bug acids from causing permanent paint damage. Quick cleaning: Dissolves bug residue in 2 minutes for easy rinsing without scrubbing. Paint protection: Prevents scratches by lifting organic contaminants safely. Coating safe: Approved for cars with ceramic coatings, paint protection film (PPF), or wax. Capacity: 500ml. Directions for use Prep: Use right after a trip for best results. Make sure all surfaces are cool to the touch. If needed, cool the vehicle down with water first. Apply: Spray Plash KUKAIŅIEM directly onto bug-covered areas like the bumper, hood, lights, mirrors, and glass. Leave on surface: Let the product react for about 2 minutes. Do not let it dry on the surface. Rinse: Wash off thoroughly with a strong water stream. Repeat: Repeat the process if needed, then continue with your normal wash routine. Product details & safety Use with the included spray trigger. Wear protective gloves and shake the bottle well before use. Do not apply to hot surfaces or in direct sunlight. In warm weather, work in the shade and cool the bodywork with water until it is cold to the touch. Test on an inconspicuous area before first full use.

Lasīt vairāk mazāk

PLASH BITUMS Tar remover created to dissolve and safely remove bitumen, tar, sap, glue, and oil spots from vehicle surfaces. It removes sticky layers to restore paint shine and help water-repellent coatings work properly. Effective cleaning: Dissolves and removes bitumen, tar, sap, glue, and oil stains. Surface safe: Approved for bodywork, glass, plastic, and metal surfaces. Bundle items: Includes a 500ml bottle, a spray trigger, and one 300 GSM microfiber towel. Directions for use Wash: Wash the car completely with shampoo and a wash mitt. Wipe away excess water or let the surface dry. Apply: Ensure the vehicle is cool and dry. Spray the product onto the bodywork using the included trigger. Work in a shaded area. Leave on surface: Let the product react for 1–5 minutes. Do not allow it to dry on the paint. Wipe: Gently wipe the surface with the microfiber towel without pressing hard or scrubbing. Repeat if necessary. Rinse: Rinse the car thoroughly with water to remove all remaining product residue. Product details & safety Use only outdoors or in well-ventilated spaces. Do not apply to hot surfaces or in direct sunlight. Test on an inconspicuous area before first full use. Always wear protective gloves. Remove the spray trigger after use, screw the original cap back on, and store only in the original packaging.

Lasīt vairāk mazāk