Adhesives and Sealants

RADEX 2K Plastic Adhesive is a structural (forms a distinct layer) fast-curing two-component product for repairing plastic materials. Can be used on various plastic, wood, fiberglass and ceramic surfaces. On some surfaces, such as PPE plastics, a plastic adhesive primer is required. The kit includes mixing nozzles to easily mix the two components without air bubbles and waste. Before applying the adhesive, clean and degrease the surface, allow to dry for the specified time at 20 degrees. Sandable in 10 minutes. Total volume 50ml.

Read more less

RADEX 801 Glazing adhesive is a one-component 310 ml tube, ultra fast-curing (short Drive Away Time), flexible polyurethane adhesive for the bonding of vehicle glass-direct glazing. It is ideal for direct glazing on vehicles where High Shear Modulus and Non Conductive properties are required. Solvent free, it is completely odorless. RADEX 801 application The surfaces to be treated should be perfectly clean, dry and free from dust and grease. It is necessary to apply RADEX Cleaner/Activator and RADEX Primer on glass.

Read more less

HG POWER GLUE primer is a preparatory coating that improves adhesion on difficult-to-bond plastics (volume - 15ml). Some plastics, such as PE and PP, have a wax-like surface that prevents glue from bonding properly. Without a primer, adhesion is non-existing or weak and unreliable. Using this primer allows you to securely bond wax-like materials such as PE and PP. Prior to applying primer surface must be cleaned and degreased. For best adhesion everything should be applied at room temperature.

Read more less

RADEX DSA double-sided mounting tape on a polyethylene base. It is resistant to gasoline, oils, solvents, UV and temperature up to 120°C. Available in widths from 9 to 25 millimeters, length 10 meters, thickness 0,95 mm. Double-sided tape is for the assembly of trim, side moldings, emblems, signs, etc. and vibration-proof gluing on the car body. RADEX DSA double-sided tape usage guide Use on a clean degreased surface, surface and tape temperature at least 15 degrees Celsius, for best performance warm up tape and surface to 30 degrees, apply for a minute with pressure. Full bonding after 24 hours at 23 degrees Celsius.

Read more less

RADEX 701 One-component polyurethane sealant - 290 ml, available in white, gray and black. Fast-curing and flexible sealant for sealing the car body, weld connections. For use with a caulking gun. Specially formulated to meet the demands of the automotive industry. The sealant has a controlled viscosity and is easy to smooth with a brush or rubber blade if a thin sealant layer is required. It is repaintable after surface curing.

Read more less

Radex BS Seal is a one-component synthetic rubber sealant for seams in 1kg metal can. The Quickly forms an elastic textured coating similar to the original seams. Radex BS Seal seam sealant has good mechanical strength, excellent anti-corrosion and soundproofing properties. The product has resistance to water, oil, gasoline. product is very easy to apply with a mastic brush (must have stiff bristles, as it is very thick). Brushes not included.

Read more less

RADEX 901 spray sealant is a beige or grey one-component moisture-curing coating based on modified silane polymer with high mechanical strength in a 290ml bottle and to be applied with PGS sealant spray gun. It provides excellent corrosion protection. RADEX 901 application areas - welds and welded joints, forming flexible anti-chipping coatings on the bottom of cars.

Read more less

HG Power Glue super glue kit with granules is ideal for filling and repairing cracks or holes, reinforcing materials, copying of broken parts and for connecting materials. After curing the glue it can be immediately mechanically modified, sanded, drilled and painted over.The glue joints are additionally strengthened with the powder, are resistant to chemical substances. Gluing sets – HG Extreme glue – 20g, HG Granulate – 40g, (minis) – glue 5g, granules 10g. With some materials, such as specific PE or PP plastics, HG Power Glue primer and/or activator is required to ensure a successful bond.

Read more less