Vehicle and specialized clearcoats including spray-can (aerosol) options, 2K systems, and ceramic clearcoats for durable protection, gloss, and reliable refinishing results.
Vehicle and specialized clearcoats
-
MULTIFULLER Multifuller 1K matt clearcoat aerosol
Multifuller 1K matt clearcoat in spray can, total volume 400ml. This product allows you to obtain a fast-drying, resistant matt finish. Full drying time at 20 degrees Celsius – 24 hours. is NOT solvent resistant. Multifuller Matt clearcoat Technical Data Sheet in English
€8,45
-
RADEX RADEX HS ECO 2K clearcoat with hardener
RADEX HS ECO is a budget class, but good quality, high density 2k vehicle clearcoat - volume 1l clearcoat + 500ml hardener. HS ECO clearcoat is used with HS ECO hardener in a ratio of 2:1. Can be applied on base paint and water-based paint base layers. Can use up to 10% acrylic thinner AT30. After mixing with hardener, spray within 2 hours. If separate components necessary, contact us through email. In the store, you can order a product by weight.
€24,95
-
RADEX RADEX SPRAY-IT clearcoat
RADEX SPRAY-IT clearcoat in 500 ml aerosol is a protective layer applied on the base color to give it durability and shine. Clearcoat can be applied in 2 layers for ~1.5m2 area. Suggested time between layers - 15 minutes at 20 degrees Celsius. Final layer should leave shine immediately after spraying (10-15cm distance from surface.) 1K lacquer is not resistant to solvents. Do not apply in a place where fuel and other solvents will get to it.
€7,50
-
RADEX RADEX HS 2K clearcoat with hardener
Radex HS is a high quality, 2k high density car clearcoat. Thanks to the ultra-fast drying technology and excellent initial hardness, it reduces repair time and energy consumption when polishing after painting. RADEX HS clearcoat is used with VC30 (standard) or VC10 (fast, low temperature) hardeners in a ratio of 2:1. Can add up to 10% RADEX AT10, or AT30 thinners accordingly for thinning the texture if necessary. Can be applied on base paint and water-based paint base layers. Drying time at 20 degrees Celsius - 14 hours. Use within 30 mins when mixing with VC10 and within 2 hours when mixing with VC30. In the store, you can order this product by weight starting from 100ml. To order components separately, contact us through email.
€40,45 - €196,45
-
WETOR WETOR 965 headlight clearcoat spray
WETOR 965 is a one-component transparent spray clearcoat specially developed for application on polycarbonate car headlights with additional UV protection. Spray volume - 400ml. WETOR 965 headlight clearcoat application Remove headlights if possible, if not mask around the headlights Sand the surface of the headlights until it is evenly sanded with P800 grit sandpaper (if headlights in a bad condition, might need lower grit sanding prior to that - p320, p400, p500, p600.) Clean the surface from dust and degrease. Apply 2-3 coats directly, waiting 10 to 25 minutes between each coat depending on the temperature at which the clearcoat is applied. The final layer should immediately have a clear and glossy finish.
€19,90
-
CAR-REP CAR-REP AcrylComp clearcoat spray
CAR-REP AcrylComp clearcoat spray, total volume 500ml, appropriate for 2 layers of clearcoat on 1 square meter or approx. 1 small body panel - (door, fender, etc.). Bumper, hood, boot requires at least 2 for most cars. CAR-REP clearcoat application Sand, clean, degrease the surface if necessary. Remove dust. Shake the can for 2-3 min. Test on a hidden area. Spray from 15 cm distance, starting outside the object to be painted, as small drops may form at the beginning of spraying. Apply a light first coat, repeat after 15 min with a slightly thicker coat, after which the finish should be glossy right after applying, but the clearcoat does not start forming drops. Provides surface wear resistance and scratch protection - sensitive to solvents.
€9,50