Repair rust bubbles, deep scratches, or repaint a replaced part with Audi spray paint, matched to your factory color code. Available for popular Audi paint codes like LA7W, LS9R, LX5H, LX7W, LY7C, LY7M, LY9B, LY9C, LY9T, LZ7L, LZ7S, LZ9W, LZ9Y, and any other Audi paint code.Can't find it? Call AUDI dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? For latvian clients - Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. Which finish do you need? For a fast, temporary fix, choose the Quick-Fix Spray Can: a 1K clearcoat built directly into the paint delivers a durable(ish), glossy result in one product, with no separate clearcoat step. For a longer-lasting, higher-gloss factory-style finish, choose a kit with a separate base coat and clearcoat can (see kit options below). In kits we have matched products our clients over the last 10 years enjoy most! Choose your Audi spray paint kit 1. Audi spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Audi quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Audi small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Audi basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (car-rep if available, else hb-body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Audi large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (car-rep if available, else hb-body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Audi significant surface damage kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or multifuller) Finishing putty, small package (0.2kg) (Radex or multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-rep or HB-body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-rep if available, else HB-body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, car-rep or other alternatives otherwise) 1× Acrylic primer spray (Appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Audi paint color code list Code Alt. Code Color name LA7W 8E Reflex Silver Metallic LS9R 2Y Glacier White Metallic LX5H 2D Navarra Blue Metallic LX7W P5 Ice Silver Metallic LY7C T2 Nardo Grey LY7M 1Y Aluminium Silver Metallic LY9B A2 Brilliant Black LY9C T9 Ibis White LY9T 0E Mythos Black Metallic LZ7L 1R Lava Grey Pearl LZ7S 6Y Daytona Grey Pearl LZ9W 4Z Ebony Black Pearl LZ9Y L8 Phantom Black Pearl Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". When ordering tri-coat color code, order additional spray paint can for effect layer. How to find your Audi paint code Check the sticker in your service book or trunk/boot area for your paint code, listed alongside other vehicle data. Can't find it? Call AUDI dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). When ordering tri-coat color code, order additional spray paint can for effect layer. How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Avoid sanding in only one direction; this prevents deep grooves from forming. Matte (scuff) and degrease the surface during preparation, even when it only needs repainting (no sanding or filling) and is already in good condition. Place aerosol cans in water at about 50°C (122°F) before use to increase the pressure inside the can. This produces a more even, higher-quality spray. Do not put in hotter water, as the increase in pressure can cause issues to the aerosol! Start spraying just off the edge of the part, then move the spray onto the surface without releasing the trigger. The first burst of pressure from any aerosol spits out droplets rather than an even mist. Shake every aerosol can for 3–5 minutes before use. Read the instructions on your specific clearcoat, primer, rust converter, and paint before use. Drying times vary by product. Prime only the damaged area where possible. Apply paint slightly beyond that area, but clearcoat the entire part/panel to avoid a visible line where the clearcoat starts and stops. If not possible, you will need to sand with p3000 and polish the faded part of clearcoat. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €93,90
Repair rust bubbles, deep scratches, or repaint a replaced part with BMW spray paint, matched to your factory color code. Available for popular BMW paint codes like 300, 314, 317, 354, 416, 475, 668, A35, A52, A96, B09, B39, B45, C08, and any other BMW paint code. Can't find it? Call BMW dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? For BMW also sites like bimmer.work or mdecoder.com can show color name & code when entering vin code. For Latvian clients - Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. Choose your BMW spray paint kit 1. BMW spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. BMW quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. BMW small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. BMW basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. BMW large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. BMW rust & hole surface damage kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. BMW paint color code list Code Color name 300 Alpinweiß III (Alpine White III) 314 Hellrot (Bright Red) 317 Orientblau Metallic (Orient Blue Metallic) 354 Titansilber Metallic (Titanium Silver Metallic) 416 Carbonschwarz Metallic (Carbon Black Metallic) 475 Saphirschwarz Metallic (Black Sapphire Metallic) 668 Schwarz II (Jet Black / Gloss Black) A35 Monacoblau Metallic (Monaco Blue / Imperial Blue Metallic) A52 Spacegrau Metallic (Space Grey Metallic) A96 Mineralweiß Metallic (Mineral White Metallic) tri-coat B09 Marrakeschbraun Metallic (Marrakesh Brown Metallic) B39 Mineralgrau Metallic (Mineral Grey Metallic) B45 Estorilblau II Metallic (Estoril Blue II Metallic) C08 Platinsilber Metallic (Platinum Silver Metallic) Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". When ordering tri-coat color code, order additional spray paint can for effect layer. How to find your BMW paint code locations To find the BMW paint code check the sticker in your passenger and driver door, under the bonnet on strut towers for your paint code, listed alongside other vehicle data. Can't find it? Call BMW dealer center service/parts department, ask for color code & provide VIN. For BMW also sites like bimmer.work or mdecoder.com can show color name & code when entering vin code. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). When ordering tri-coat color code, order additional spray paint can for effect layer. How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Avoid sanding in only one direction; this prevents deep grooves from forming. Matte (scuff) and degrease the surface during preparation, even when it only needs repainting (no sanding or filling) and is already in good condition. Place aerosol cans in water at about 50°C (122°F) before use to increase the pressure inside the can. This produces a more even, higher-quality spray. Do not put in hotter water, as the increase in pressure can cause issues to the aerosol! Start spraying just off the edge of the part, then move the spray onto the surface without releasing the trigger. The first burst of pressure from any aerosol spits out droplets rather than an even mist. Shake every aerosol can for 3–5 minutes before use. Read the instructions on your specific clearcoat, primer, rust converter, and paint before use. Drying times vary by product. Prime only the damaged area where possible. Apply paint slightly beyond that area, but clearcoat the entire part/panel to avoid a visible line where the clearcoat starts and stops. If not possible, you will need to sand with P3000 and polish the faded part of clearcoat. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Vehicle paint spray manufactured based on the color code. The color code must be specified in the order notes. For physical and chemical durability and gloss finish a clearcoat layer is required. The product is non-returnable (specially manufactured). Aerosol volume – 400 ml, paint volume in aerosol – 100 ml (suitable for one wing, door (~1m^2 in two layers), but the coverage varies depending on the shade and type of paint). Indicate the color type and code in the order notes. Specific paint codes (tri-coat paint) might require 2 spray cans (usually white, red, gold effect paint codes). Available color types: Base color – a car with a single-tone, metallic or pearl effect (always requires additional varnish to ensure gloss and durability). Example of order notes – bmw 354; Volvo 452; VW LA7W; Audi LZ9Y; Skoda 9202; Mercedes 147. If the color is not selected in the store on site in advance according to the test cards, it is not possible to guarantee an exact match. One color code can have up to 30 sub-variations with slightly darker, lighter, yellower, etc. - We provide most popular variation out of 3 paint systems - Lesonal, Challanger, Mobihel. Packaging may differ visually from the image shown, it is for illustrative purposes only. The product is not returnable (specially manufactured). Car spray paint usage tutorial
€15,95
Repair rust bubbles, deep scratches, or repaint a replaced part with Cupra spray paint, matched to your factory color code. Available for popular Cupra paint codes like L3EO, LB9Z, LH1X, LI7F, LM5J, LM6T, LQ5H, LS4A, LS4B, LS7A, LS7G, LS7H, LS9R, LV5G, LX5B, LY9T, LZ7G, and any other Cupra paint code. Choose your Cupra spray paint kit 1. Cupra spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Cupra quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Cupra small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Cupra basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Cupra large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Cupra rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Cupra paint color code list Code Alt. Code Color name L3EO L2OJ / 3E0 Nuclear Grey Metallic LB9Z K8K8 / K8 White Silver Metallic LH1X 1B1B / H1X Atacama Desert Metallic LI7F 5K5K / 5K Basalt Grey (Urano Grey) LM5J M5J / N1 Saphirblau / Sapphire Blue Metallic LM6T M6T / U4 Cliff Grey Metallic LQ5H Q5H / 9K9K Fiord Blue LS4A Q5Q5 / S4A Dark Void LS4B 8D8D / 8D Plasma Iridescent Metallic LS7A S7A / 4U4U / 4U Taiga Grey Metallic LS7G S7G / R6R6 / R6 Graphene Grey LS7H S7H / S7S7 / S7 Magnetic Tech Grey Metallic LS9R S9R / 2Y2Y / 2Y Glacial White / Nevada White Metallic LV5G V5G Tavascan Blue Metallic LX5B - Firmamentblau / Firmament Blue Metallic LY9T Y9T / 0E0E / 0E Midnight Black Metallic LZ7G Z7G / L5 Florett / Urban Silver Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Cupra paint code On most Cupras the paint code is on a white vehicle data sticker in the boot - lift the boot floor and check the spare wheel well or under the boot mat. Look for the line marked "PAINT NO.", where the code starts with L, for example "LS7H" or "LS9R" (the shorter codes, such as "S7S7" or "2Y", mean the same colour). The same sticker is usually printed in the front of the service book. If you can't find either, a Cupra dealer can look the code up from your VIN. Can't find it? Call Cupra dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €93,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Dacia spray paint, matched to your factory color code. Available for popular Dacia paint codes like 369, 676, B76, D42, D69, DQK, HNP, HNV, HNW, KNA, KNM, KPW, KQE, KQG, RPL, RPR, RQH, RRQ, and any other Dacia paint code. Choose your Dacia spray paint kit 1. Dacia spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Dacia quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Dacia small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Dacia basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Dacia large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Dacia rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Dacia paint color code list Code Color name 369 Blanc Glacier (Glacier White) 676 Noir Nacré (Pearl Black) B76 Rouge De Feu (Fire Red) D42 Bleu Navy (Navy Blue) D69 Gris Platine (Platinum Grey) DQK Vert Cèdre / Oxide Green Metallic HNP Beige Dune Metallic HNV Beige Sandstone HNW Beige Safari Metallic KNA Gris Comète (Comet Grey) KNM Gris Basalte Metallic (Basalt Grey) KPW Gris Urban (Urban Grey) KQE Gris Éclair (Lightning Grey) KQG Gris Schiste Metallic (Slate Grey) RPL Bleu d'Azurite (Azurite Blue) RPR Bleu Cosmos (Cosmos Blue) RQH Bleu Iron (Iron Blue Metallic) RRQ Bleu Indigo (Indigo Blue) Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Dacia paint code On most Dacias the paint code is on a sticker in the driver's side door jamb - open the driver's door and look at the pillar where the door latches. The paint code is three characters long, for example "KNA" or "RQH". On some stickers it is printed as five characters with a prefix ("TE", "OV" or "NV"), such as "TEKNA" - in that case the paint code is the last three characters. On some models the sticker is under the bonnet or in the boot instead. Can't find it? Call Dacia dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €93,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Ford spray paint, matched to your factory color code. Available for popular Ford paint codes like 1MDE, 2431C, 3CVC, 3RSE, 6DYE, 7VTA, 9VJG, DSTE, FM6E, JAYC, KBXE, and any other Ford paint code. Choose your Ford spray paint kit 1. Ford spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Ford quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Ford small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Ford basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Ford large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Ford rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Ford paint color code list Code Color name 1MDE / 1MDEWHA Carbonized Gray / Asher Gray Metallic 2431C / 2PJE / ZJNCWWA Moondust Silver Metallic (Gris Argent) 3CVC / 3CVCWWA / PN3BG Performance Blue / Azul Racing Metallic 3RSE / 3RSEWWA Tango Red Metallic 6DYE / 6DYEWWA Sea Grey Metallic 7VTA / 7VTAWWA Frozen White 9VJG / 9VJGWHA White Platinum Metallic — tri-coat DSTE / DSTEWTA Ruby Red Metallic — tri-coat FM6E / FM6EWHA Magnetic Metallic JAYC / JAYCWWA Panther Black Metallic KBXE / KBXEWHA Agate Black Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Ford paint code On most Fords the paint code is on the vehicle identification sticker in the driver's side door jamb - open the driver's door and look at the B-pillar or the edge of the door for the line marked "EXT PNT". On European Fords the code on the sticker is short, for example "M6" or "H7", while the longer form used when ordering paint (for example "FM6EWHA" or "7VTAWWA") means the same colour. If the sticker is missing, check the glove box or under the bonnet near the firewall. Can't find it? Call Ford dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Honda spray paint, matched to your factory color code. Available for popular Honda paint codes like B593M, B92P, NH0, NH578, NH623M, NH624P, NH700M, NH731P, NH737M, NH788P, NH797M, NH830M, NH883P, NH904M, R543P, R565M, R81, and any other Honda paint code. Choose your Honda spray paint kit 1. Honda spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Honda quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Honda small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Honda basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Honda large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Honda rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Honda paint color code list Code Color name B593M Aegean Blue Metallic (Brilliant Sporty Blue / Diffused Sky Blue) B92P Nighthawk Black Pearl NH0 Championship White NH578 Taffeta White NH623M Satin Silver Metallic NH624P Premium White Pearl NH700M Alabaster Silver Metallic NH731P Crystal Black Pearl NH737M Polished Metal Metallic NH788P White Orchid Pearl — tri-coat NH797M Modern Steel Metallic NH830M Lunar Silver Metallic NH883P Platinum White Pearl — tri-coat NH904M Meteoroid Gray Metallic (Regolith Gray) R543P Crimson Pearl (Carnelian Red) R565M Premium Crystal Red Metallic R81 Milano Red Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Honda paint code On most Hondas the paint code is on the service label in the driver's side door jamb - open the driver's door and look for a white or silver sticker, with the code printed in the lower-right corner next to "C" or "EXT". Honda codes are longer than most, usually two letters, three digits and a letter, for example "NH-731P" or "B593M". If the label is missing, check the driver's side B-pillar, and on older models the radiator support under the bonnet. Can't find it? Call Honda dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Hyundai spray paint, matched to your factory color code. Available for popular Hyundai paint codes like 2R, 7F, A2B, EB, JHR, MZH, NW, PE2, PL2, PM2, PSW, R2P, R2T, SAW, T2P, TAK, U2P, W6H, WAW, XFB, and any other Hyundai paint code. Choose your Hyundai spray paint kit 1. Hyundai spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Hyundai quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Hyundai small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Hyundai basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Hyundai large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Hyundai rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Hyundai paint color code list Code Color name 2R Quicksilver Metallic (Continental Silver) 7F Captiva White (Crystal White) A2B Abyss Black Pearl EB Ebony Black JHR Engine Red MZH Ultra Black Pearl (Phantom Black) NW Noble White (Alpine White / Nordic White) PE2 Ecotronic Gray Metallic PL2 Jupiter Orange Metallic PM2 Meta Blue Pearl PSW Polar White R2P Ultimate Red Metallic R2T Shimmering Silver Metallic SAW / SW1 Atlas White T2P Cypress Green Pearl TAK Shadow Gray Metallic (Titanium Gray) U2P Sailing Blue Pearl W6H Serenity White Pearl — tri-coat WAW Ceramic White XFB Performance Blue Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Hyundai paint code On most Hyundais the paint code is on a sticker in the driver's side door jamb - open the driver's door and look at the pillar or the area around the door hinges for a white or silver label. The paint code is 2 or 3 characters long and is printed next to the word "COLOR" or "PAINT", for example "MZH" or "PSW". On some models (for example Tucson and Santa Fe) the sticker is lower down in the door opening, and on some older models it is in the engine bay on the firewall or near the strut tower. Can't find it? Call Hyundai dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Kia spray paint, matched to your factory color code. Available for popular Kia paint codes like 1K, A9, ABP, ABT, AGT, BE, BEG, C7S, DU3, EB, GLB, H8, IM, KC, KDG, KLG, SWP, UD, and any other Kia paint code. Choose your Kia spray paint kit 1. Kia spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Kia quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Kia small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Kia basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Kia large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Kia rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Kia paint color code list Code Color name 1K Black Pearl Metallic (Zilinaschwarz / Noir Basalte) A9 / AA9 True Red Metallic ABP Aurora Black Pearl ABT Platinum Graphite Metallic AGT Graphite Gray Metallic (Interstellar Gray) BE / E5B Dark Gun Metal BEG Signal Red Metallic C7S Wolf Gray DU3 Yacht Blue Metallic EB Ebony Black GLB Glacier Metallic H8 / H8G Dark Penta Metal IM / 1M Titanium Silver Metallic KC / KCS Sparkling Silver Metallic KDG Gravity Gray KLG Steel Gray Metallic SWP Snow White Pearl — tri-coat UD Clear White Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Kia paint code On most Kias the paint code is on the black VIN sticker in the driver's side door jamb - open the driver's door and look for the code in the top right corner of the sticker, or in a row marked "PAINT" or "COLOR". Kia codes are 2 or 3 characters long, for example "SWP" or "3D". On some models (for example Sorento) the sticker is on the B-pillar area of the door opening instead. Can't find it? Call Kia dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Land Rover spray paint, matched to your factory color code. Available for popular Land Rover paint codes like 001, HCD, 361, 799, 820, 867, 868, 873, 949, 961, 2201, 2204, 2207, 2409, 2454, 2463, 2491, 2495, and any other Land Rover paint code. Choose your Land Rover spray paint kit 1. Land Rover spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Land Rover quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Land Rover small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Land Rover basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Land Rover large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Land Rover rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Land Rover paint color code list Code Color name 001 / 512 / HCC / LRC001-HCC Deep Bronze / Ascot Green HCD / LRC005-HCD Pastel Green 361 / LRC361-AMF Camel Yellow / Sandglow 799 / HFU / LRC799 / LRC799-HFU Keswick Green 820 / 1AG / PAB / LRC820-PAB Santorini Black Metallic 867 / 1AA / NDH / NER Fuji White 868 / 1AF / 2144 / CAH / LRC868 CAH Firenze Red Metallic 873 / 1AB / LKH / LRC873 Corris Grey Metallic 949 / LJZ / LRC949 Orkney Grey Metallic 961 / BLVC961 / HAF / LRC961-HAF Epsom Green Metallic 2201 / 1AQ / NAK / LRC2201-NAK Yulong White Metallic — tri-coat 2204 / 1AU / LKT Carpathian Grey Metallic 2207 / HBV / LRC2207-HBV Grasmere Green Metallic 2409 / 1DF / LRA Eiger Grey Metallic 2454 / 1EJ / NCZ Ostuni Pearl White — tri-coat 2463 / 1BQ / 1EZ / JIS Velocity Blue Metallic 2491 / GCQ Sunset Gold Metallic 2495 / 1EH / JJA Varesine Blue Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Land Rover paint code On most Land Rovers the paint code is on a black sticker in the driver's side door jamb - open the driver's door and look for the line marked "Paint" or "PNT". The code may be written in several forms for the same colour, for example "820", "1AG", "PAB" or "LRC820-PAB" - any of them identify the same paint. On older models the sticker is under the bonnet on the radiator support instead. Can't find it? Call Land Rover dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Lexus spray paint, matched to your factory color code. Available for popular Lexus paint codes like 077, 083, 085, 1C0, 1H9, 1J4, 1J7, 1L2, 202, 212, 217, 223, 3R1, 4V3, 4Y5, 8U0, 8X1, 8X5, and any other Lexus paint code. Choose your Lexus spray paint kit 1. Lexus spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Lexus quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Lexus small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Lexus basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Lexus large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Lexus rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Lexus paint color code list Code Color name 077 Starfire Pearl — tri-coat 083 Ultra White (White Nova) — tri-coat 085 Eminent White Pearl — tri-coat 1C0 Millennium Silver Metallic 1H9 Nebula Gray Pearl (Mercury Grey) 1J4 Silver Lining Metallic (Platinum Silver) 1J7 Atomic Silver 1L2 Iridium Metallic (Sonic Iridium) 202 Black Onyx 212 Obsidian (Black) 217 Stargazer Black (Starlight Black) 223 Caviar (Graphite Black) 3R1 Matador Red Mica 4V3 Fire Agate Pearl 4Y5 Sonic Copper (Copper Crest) 8U0 Black Sapphire Pearl — tri-coat 8X1 Ultrasonic Blue Mica 2.0 — tri-coat 8X5 Nightfall Mica (Deep Blue) Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Lexus paint code On most Lexuses the paint code is on the vehicle identification sticker in the driver's side door jamb - open the driver's door and look for the row marked "C/TR". The paint code is the three characters right after "C/", for example "C/TR 212 FA20" means the paint code is "212" (the second code is the interior trim). If the sticker is missing, check the driver's side B-pillar or the radiator support under the bonnet. Can't find it? Call Lexus dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Mazda spray paint, matched to your factory color code. Available for popular Mazda paint codes like 16W, 25D, 29Y, 34K, 41W, 42M, 45P, 46G, 46V, 47A, 47C, 47S, A3F, A4D, SU, and any other Mazda paint code. Choose your Mazda spray paint kit 1. Mazda spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Mazda quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Mazda small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Mazda basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Mazda large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Mazda rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Mazda paint color code list Code Color name 16W / 38A Black Metallic 25D Snowflake White Pearl Mica (Satinweiss) — tri-coat 29Y Titanium Grey Metallic 34K Arachneweiss Metallic (Crystal White Pearl) — tri-coat 41W Jet Black Metallic (Jet Black Mica) 42M Deep Crystal Blue Metallic 45P / D10 Sonic Silver Metallic 46G Machine Grey Metallic — tri-coat 46V Soul Red Crystal Metallic — tri-coat 47A Ceramic Metallic 47C Polymetal Grey Metallic 47S Platinum Quartz Metallic A3F / PX / PZ Brillantschwarz (Brilliant Black) A4D Arctic White SU Classic Red Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Mazda paint code On most Mazdas the paint code is on the body color sticker in the driver's side door jamb - open the driver's door and look for the label marked "COLOR". The paint code is two or three characters long, for example "46V" or "SU". On the Mazda3 and MX-5 it is on the door edge near the hinge, and if the sticker is missing, check the driver's side B-pillar or the radiator support under the bonnet. Can't find it? Call Mazda dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Mercedes spray paint, matched to your factory color code. Available for popular Mercedes paint codes like 040, 147, 149, 191, 197, 650, 744, 775, 799, 890, 992, and any other Mercedes paint code. Choose your Mercedes spray paint kit 1. Mercedes spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Mercedes quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Mercedes small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Mercedes basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Mercedes large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Mercedes rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Mercedes paint color code list Code Alt. Code Color name 040 9040 / 161 / 9161 Schwarz (Black) 147 9147 Arktikweiss (Arctic White) 149 9149 Polarweiss (Polar White) 191 9191 Kosmosschwarz Metallic (Cosmos Black) 197 9197 / DB197 / A0816 Obsidianschwarz Metallic (Obsidian Black) 199 9199 Blauschwarz Metallic (Blue Black) 650 9650 Calcitweiss / Zirrusweiss (Calcite White) 744 9744 / DB744 Brillantsilber Metallic (Brilliant Silver) 755 — Tenoritgrau Metallic (Tenorite Grey) 775 9775 Iridiumsilber Metallic (Iridium Silver) 799 9799 Diamantweiss Metallic (Diamond White) - tri-coat 890 5890 / 890U Cavansitblau Metallic (Cavansite Blue) 922 9922 Hightech Silber Metallic (Hi-Tech Silver) 992 7992 / 992U Selenitgrau Metallic (Selenite Grey) Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". When ordering tri-coat color code, order additional spray paint can for effect layer. How to find your Mercedes paint code On most Mercedes the paint code is in the driver's side door jamb - open the driver's door and look for a small sticker or plate. The paint code is a three-digit number. On older models it is on the data plate above the radiator, on the radiator support, or on the inner wing in the engine bay. Can't find it? Call Mercedes dealer center service/parts department, ask for color code & provide VIN. Some Mercedes paint codes can be found in online VIN decoders like mbdecoder.com. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). When ordering unlisted tri-coat color code, order additional spray paint can for effect layer. How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Avoid sanding in only one direction; this prevents deep grooves from forming. Matte (scuff) and degrease the surface during preparation, even when it only needs repainting (no sanding or filling) and is already in good condition. Place aerosol cans in water at about 50°C (122°F) before use to increase the pressure inside the can. This produces a more even, higher-quality spray. Do not put in hotter water, as the increase in pressure can cause issues to the aerosol! Start spraying just off the edge of the part, then move the spray onto the surface without releasing the trigger. The first burst of pressure from any aerosol spits out droplets rather than an even mist. Shake every aerosol can for 3–5 minutes before use. Read the instructions on your specific clearcoat, primer, rust converter, and paint before use. Drying times vary by product. Prime only the damaged area where possible. Apply paint slightly beyond that area, but clearcoat the entire part/panel to avoid a visible line where the clearcoat starts and stops. If not possible, you will need to sand with P3000 and polish the faded part of clearcoat. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Mitsubishi spray paint, matched to your factory color code. Available for popular Mitsubishi paint codes like A19, A31, A39, A66, A69, A72, P26, U17, W09, W13, W32, W85, X08, X37, X40, X42, X47, and any other Mitsubishi paint code. Choose your Mitsubishi spray paint kit 1. Mitsubishi spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Mitsubishi quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Mitsubishi small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Mitsubishi basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Mitsubishi large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Mitsubishi rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Mitsubishi paint color code list Code Color name A19 Sterling Silver Metallic (Cool Silver) A31 Cool Silver Metallic (Apex Silver / Blade Silver) A39 Stone Gray Metallic A66 Starlight Silver Metallic (Cool Silver) A69 Satellite Silver Metallic A72 Dark Gray Metallic (Carbon Grey Pearl / Graphite Grey) P26 Rally Red Metallic (Orient Red) U17 Mercury Gray Metallic (Titanium Grey) W09 Summit White (Sophia White) W13 Diamond White Pearl — tri-coat W32 Polar White (Fairy White) W85 White Diamond — tri-coat X08 Mystic Black Pearl X37 Jet Black Mica X40 Ruby Black Pearl X42 Amethyst Black (Labrador Black Pearl) X47 Black Diamond Pearl Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Mitsubishi paint code On most Mitsubishis the paint code is on a metal plate in the engine bay - open the bonnet and look at the firewall on the driver's side, or near the radiator support. The paint code is three characters long and is the first of the code groups on the plate, for example "W13" or "X42". On many newer models it is instead on a sticker in the driver's or passenger's side door jamb. Can't find it? Call Mitsubishi dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Nissan spray paint, matched to your factory color code. Available for popular Nissan paint codes like 326, DAP, GAB, GAT, K23, KAD, KBD, KH3, KL0, KY0, NAH, NBV, QAB, QM1, QX1, Z10, Z11, and any other Nissan paint code. Choose your Nissan spray paint kit 1. Nissan spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Nissan quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Nissan small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Nissan basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Nissan large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Nissan rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Nissan paint color code list Code Color name 326 Arctic White (Solid White) DAP Northern Lights Metallic (Dark Bluish Green) GAB Nightshade Metallic GAT Black Pearl Metallic (Black Diamond) K23 Brilliant Silver Metallic KAD Gun Metallic (Dark Grey) KBD Dark Grey Metallic KH3 Super Black (Black Obsidian) KL0 Silver Metallic (Silver Crystal) KY0 Blade Silver Metallic (Platinum) NAH Force Red / Cayenne Red Metallic NBV Fuji Sunset Red Metallic - tri-coat QAB Pearl White (Ivory Pearl) - tri-coat QM1 White (Cloud White) QX1 White Pearl (Glacier Pearl) - tri-coat Z10 Flame Red (Solid Red) Z11 Pearl Black Metallic (Enigma Black) Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". When ordering tri-coat color code, order additional spray paint can for effect layer. How to find your Nissan paint code On most Nissans the paint code is on a sticker in the driver's side door jamb - open the driver's door and look at the pillar where the door latches. The paint code is three characters long and is printed under the word "COLOR", for example "KH3" or "QAB". On some models (for example Qashqai and Micra) the sticker is on the passenger side instead, and on some older models it is under the bonnet. Can't find it? Call Nissan dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). When ordering tri-coat color code, order additional spray paint can for effect layer. How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Avoid sanding in only one direction; this prevents deep grooves from forming. Matte (scuff) and degrease the surface during preparation, even when it only needs repainting (no sanding or filling) and is already in good condition. Place aerosol cans in water at about 50°C (122°F) before use to increase the pressure inside the can. This produces a more even, higher-quality spray. Do not put in hotter water, as the increase in pressure can cause issues to the aerosol! Start spraying just off the edge of the part, then move the spray onto the surface without releasing the trigger. The first burst of pressure from any aerosol spits out droplets rather than an even mist. Shake every aerosol can for 3–5 minutes before use. Read the instructions on your specific clearcoat, primer, rust converter, and paint before use. Drying times vary by product. Prime only the damaged area where possible. Apply paint slightly beyond that area, but clearcoat the entire part/panel to avoid a visible line where the clearcoat starts and stops. If not possible, you will need to sand with P3000 and polish the faded part of clearcoat. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Opel spray paint, matched to your factory color code. Available for popular Opel paint codes like 111, 157, 163, 190, 200, 474, 547, 20R, 22C, 40R, G20, G40, and any other Opel paint code. Choose your Opel spray paint kit 1. Opel spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Opel quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Opel small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Opel basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Opel large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Opel rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Opel plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Opel paint color code list Code Alt. Code Color name 111 280 / 826 / 951 / 07L / 2UU / J4C / UY Carbonschwarz (Carbon Black) 157 01L / 09K / GRK Starsilber Metallic (Silver III Metallic) 163 4AU / GBJ / GRJ Gris Eclair Metallic (Light Grey Metallic) 190 - Phantom Grey Metallic 193 - Platinum / Aluminium Silber Metallic 200 80L Schwarz (Black) 474 10L / 10U / GF0 / GKQ Blanc Casablanca (Casablanca White) 547 54B / 79U / C70 / G0A / GQY Magmarot (Flame Red) 20R 11K / 2HU / 284L / 784J / GBG / GQR Saphirschwarz (Black Sapphire Metallic) 21B 98K / 923K / GBK Bleu Ultra Metallic (Ultra Blue Metallic) 22C 01Q / 19F / 31T / GAR Carbon Flash / Graphitschwarz Metallic 22Y 507B / GB0 / GB8 / GB9 Black Meet Kettle Metallic 40R 09T / 8624 / GAZ / GOW Blanc Galaxie (Glacier White) G20 G2O White Jade G40 G4O / EVL Moonstone Grey Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". When ordering tri-coat color code, order additional spray paint can for effect layer. How to find your Opel paint code On most Opels the paint code is on the vehicle identification sticker in the driver's side door jamb - open the driver's door and look at the door frame or B-pillar. On some newer models (for example Astra J) it is on the passenger side instead, and on some models it is under the bonnet or in the boot. Can't find it? Call Opel dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). When ordering tri-coat color code, order additional spray paint can for effect layer. How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Avoid sanding in only one direction; this prevents deep grooves from forming. Matte (scuff) and degrease the surface during preparation, even when it only needs repainting (no sanding or filling) and is already in good condition. Place aerosol cans in water at about 50°C (122°F) before use to increase the pressure inside the can. This produces a more even, higher-quality spray. Do not put in hotter water, as the increase in pressure can cause issues to the aerosol! Start spraying just off the edge of the part, then move the spray onto the surface without releasing the trigger. The first burst of pressure from any aerosol spits out droplets rather than an even mist. Shake every aerosol can for 3–5 minutes before use. Read the instructions on your specific clearcoat, primer, rust converter, and paint before use. Drying times vary by product. Prime only the damaged area where possible. Apply paint slightly beyond that area, but clearcoat the entire part/panel to avoid a visible line where the clearcoat starts and stops. If not possible, you will need to sand with P3000 and polish the faded part of clearcoat. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €93,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Peugeot spray paint, matched to your factory color code. Available for popular Peugeot paint codes like EGE, EKQ, ELD, EPR, ESU, EVH, EVL, EWP, EXY, EYL, EZR, EZW, KCA, KGN, KJF, KJR, KKJ, KNP, KTP, KTV, KWE, and any other Peugeot paint code. Choose your Peugeot spray paint kit 1. Peugeot spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Peugeot quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Peugeot small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Peugeot basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Peugeot large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Peugeot rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Peugeot paint color code list Code Color name EGE China Blue / Bleu de Chine Nacré (Pearlescent) EKQ Diablo Red / Rouge Lucifer (Pearlescent) ELD Selenium Grey Metallic / Gris Sélénium EPR Icy White / Blanc Icy (Solid) ESU Okenite White Metallic / Blanc Okénite EVH Elixir Red Metallic / Rouge Elixir EVL Nimbus Grey Metallic / Gris Platinium EWP Bianca White / Blanc Banquise (Solid) EXY Black / Noir Onyx (Solid) EYL Iceland Grey Metallic / Gris Iceland EZR Aluminium Grey Metallic / Gris Aluminium EZW Iron Grey Metallic / Gris Fer KCA Cumulus Grey Metallic / Gris Artense KGN Bourrasque Blue Metallic / Bleu Bourrasque KJF Ardent Red / Rouge Ardent (Solid) KJR Olivine Green Metallic / Vert Olivine KKJ Titanium Grey Metallic / Gris Titane KNP Dragoon Blue / Bleu Impérial (Solid) KTP Shark Grey Metallic / Gris Shark KTV Nera Black Metallic / Noir Perla Nera KWE Pearl White / Blanc Nacré (Pearl) — tri-coat Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Peugeot paint code On most Peugeots the paint code is on a white sticker on the driver's side door pillar - open the driver's door fully and check the B-pillar where the door latches, or the A-pillar near the hinges on many newer models. The paint code is printed near the bottom of the label and is 3 or 4 characters long, for example "EWP" or "KTV" (sometimes shown in the 4-character form such as "P0WP" or "M09V"). On some older models the sticker is under the bonnet instead. Can't find it? Call Peugeot dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Porsche spray paint, matched to your factory color code. Available for popular Porsche paint codes like 019, L041, L12G, L328, L37W, L6B4, L92T, LB9A, LC9A, LC9X, LC9Z, LM2A, LM3A, LM7S, LM7Z, LM9A, LS9R, and any other Porsche paint code. Choose your Porsche spray paint kit 1. Porsche spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Porsche quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Porsche small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Porsche basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Porsche large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Porsche rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Porsche paint color code list Code Alt. Code Color name 019 2G0 / 61 Gulforange (Gulf Orange) L041 041 / 700 / 747 / A1 Schwarz (Black) L12G 12G / 13G Speed Yellow L328 328 / J8 Gulf Blue L37W / L39C 37W / 39C / E9 / F8 Midnight Blue Metallic L6B4 6B4 / 6B5 / Y1 Gris Kerguelen Metallic L92T / L92U X1 Arctic Silver Metallic LB9A B4 Carrara White LC9A 0Q / C9A Pure White (Weiss) LC9X 2T / C9X Deep Black Metallic LC9Z C9Z / Z4 Basalt Black Metallic LM2A M2A / H2 Lavaorange (Lava Orange) LM3A 027 / 80K / 84A / G1 / L80K / L84A Indischrot (Guards Red) LM7S M7S / N0 Achatgrau / Agate Grey Metallic LM7Z M7Z / Y90 GT Silver Metallic LM9A 3H / M9A Kreide / Chalk / Crayon (Racetrack Grey) LS9R 2Y / S9R Carraraweiss / Carrara White Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Porsche paint code On most Porsches the paint code is on a vehicle data label in the boot - on the 911, 718, Boxster and Cayman check the front boot (frunk), on the floor or under the edge of the lining, where the code is listed next to "Lack" or "Farbe". The code is usually written in the L-form, for example "LM9A" or "L041", often alongside a shorter code such as "3H". The same label is usually printed in the service booklet, and on newer models, the Cayenne and the Macan the sticker is in the driver's side door jamb. If you can't find it, a Porsche dealer can look the code up from your VIN. Can't find it? Call Porsche dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €93,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Renault spray paint, matched to your factory color code. Available for popular Renault paint codes like 369, 389, 694, D31, D69, GNE, GN0, KNA, KNH, KPN, KQA, KQJ, NNP, QNC, RRK, and any other Renault paint code. Choose your Renault spray paint kit 1. Renault spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Renault quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Renault small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Renault basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Renault large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Renault rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Renault paint color code list Code Alt. Code Color name 369 OV369 Blanc Glacier (Glacier White - two-coat version) 389 OV389 Blanc Glacier (Glacier White - original single-stage version) 676 NV676 Noir Nacré Metallic (Black Pearl) D31 OVD31 Blanc Casablanca (Casablanca White) D69 TED69 Gris Platine Metallic (Platinum Grey) EQB TEEQB Orange Valencia Metallic — tri-coat GN0 GNO Noir Ébène Metallic (Ebony Black) GNE TEGNE Noir Étoilé Metallic (Star Black) J37 TEJ37 Jaune Sirius Metallic (Sirius Yellow) - tri-coat KNA TEKNA Gris Comète Metallic (Comet Grey) KNH TEKNH Gris Étoilé Metallic (Star Grey) KPN TEKPN Gris Titanium Metallic (Titanium Grey) KPW OVKPW Gris Urban (Urban Grey) KQA TEKQA Gris Highland Metallic (Highland Grey) KQJ TEKQJ Gris Rafale Metallic (Storm Grey) NNP TENNP Rouge Flamme Metallic (Flame Red) - tri-coat QNC TEQNC Blanc Nacré (Pearl White) - tri-coat QNG OVQNG Blanc Minéral (Mineral White) RQH TERQH Bleu Iron Metallic (Iron Blue) RRK TERRK Bleu Sommet / Bleu Alpine II Metallic (Alpine Blue) Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". When ordering tri-coat color code, order additional spray paint can for effect layer. How to find your Renault paint code On most Renaults the paint code is on a sticker in the driver's side door jamb - open the driver's door and look at the pillar where the door latches. The code is usually printed inside an oval and is five characters long, such as "TED69" or "OV369": the paint code is the last three characters ("D69", "369"). On some models the sticker is on the passenger side or in the engine bay instead. Can't find it? Call Renault dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). When ordering tri-coat color code, order additional spray paint can for effect layer. How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Avoid sanding in only one direction; this prevents deep grooves from forming. Matte (scuff) and degrease the surface during preparation, even when it only needs repainting (no sanding or filling) and is already in good condition. Place aerosol cans in water at about 50°C (122°F) before use to increase the pressure inside the can. This produces a more even, higher-quality spray. Do not put in hotter water, as the increase in pressure can cause issues to the aerosol! Start spraying just off the edge of the part, then move the spray onto the surface without releasing the trigger. The first burst of pressure from any aerosol spits out droplets rather than an even mist. Shake every aerosol can for 3–5 minutes before use. Read the instructions on your specific clearcoat, primer, rust converter, and paint before use. Drying times vary by product. Prime only the damaged area where possible. Apply paint slightly beyond that area, but clearcoat the entire part/panel to avoid a visible line where the clearcoat starts and stops. If not possible, you will need to sand with P3000 and polish the faded part of clearcoat. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Seat spray paint, matched to your factory color code. Available for popular Seat paint codes like LA7W, LB9A, LC9X, LC9Z, LF3P, LF9E, LF9R, LM5J, LQ5H, LS3H, LS7H, LS7N, LS7U, LS7Y, LS9R, LW5L, LY3D, LY9T, and any other Seat paint code. Choose your Seat spray paint kit 1. Seat spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Seat quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Seat small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Seat basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Seat large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Seat rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Seat paint color code list Code Alt. Code Color name LA7W 8E Brilliant Silver / Reflex Silver Metallic LB9A B4 White Candy (Solid) LC9X 2T Deep Black Pearl Metallic LC9Z Z4 Negro Mágico / Magic Black Metallic LF3P K1 Rojo Velvet / Velvet Red Metallic LF9E 9P Candy White LF9R 1Z Black Magic Pearl Metallic LM5J N1 Saphirblau / Sapphire Blue Metallic LQ5H Q5H / 9K Fiord Blue LS3H 9M Rojo Emoción / Emoción Red LS7H S7 Magnetic Tech Grey Metallic LS7N 646 / L1 Gris Ártico Metallic LS7U H2 Gris Sombra Metallic LS7Y K4 Gris Luna Metallic LS9R 2Y Blanco Nevada / Nevada White Metallic LW5L 7Y Mystery Blue Metallic LY3D G2 Rojo Tornado / Tornado Red LY9T 0E Midnight Black Metallic (Mythos Black) Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Seat paint code On most Seats the paint code is on a white vehicle data sticker in the boot - lift the boot floor and check the spare wheel well or under the boot mat. Look for the line marked "PAINT NO.", where the code starts with L, for example "LS7H" or "LC9X" (the shorter code, such as "S7" or "2T", is the same colour). The same sticker is usually printed in the front of the service book. If you can't find either, a Seat dealer can look the code up from your VIN. Can't find it? Call Seat dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €93,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Skoda spray paint, matched to your factory color code. Available for popular Skoda paint codes like LA7W, LC9X, LF3P, LF5W, LF7C, LF7Y, LF9E, LF9R, LV5F, LY9T, and any other Skoda paint code. Choose your Skoda spray paint kit 1. Skoda spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Skoda quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Skoda small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Skoda basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Skoda large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Skoda rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Skoda paint color code list Code Alt. Code Color name LA7W 8E / 9156 Stříbrná Brilliant (Brilliant Silver Metallic) LC9A 0Q Pure White LC9X 2T Deep Black Metallic LF3K 8T / 8151 Červená Corrida (Corrida Red) LF3P K1 Červená Velvet (Velvet Red Metallic) LF5W 8X / 9463 Modrá Race (Race Blue Metallic) LF5X 5T / 9154 Šedá Satin (Satin Grey Metallic) LF7A M3 Šedá Steel (Steel Grey) LF7C 5X Graphite Grey Metallic LF7T 1B / 9102 Diamantsilber Metallic (Diamond Silver) LF7Y F6 Šedá Quartz (Quartz Grey / Metal Grey Metallic) LF8H 4K / 9202 Béžová Capuccino (Capuccino Beige Metallic) LF8J 9J / 9153 Šedá Anthracite (Anthracite Grey Metallic) LF9E 9P / 1026 Bílá Candy (Candy White) LF9R 1Z / 9910 Černá Magic (Black Magic Metallic) LV5F K4 Modrá Energy (Energy Blue) LY9T 0E Mythosschwarz Metallic (Mythos Black) Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". When ordering tri-coat color code, order additional spray paint can for effect layer. How to find your Skoda paint code On most Skodas the paint code is on a white sticker in the boot - lift the boot floor and check the spare wheel well or under the boot mat. It is listed alongside other vehicle data. On newer models it is instead printed on a sticker in the service book or owner's manual. Can't find it? Call Skoda dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). When ordering tri-coat color code, order additional spray paint can for effect layer. How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Avoid sanding in only one direction; this prevents deep grooves from forming. Matte (scuff) and degrease the surface during preparation, even when it only needs repainting (no sanding or filling) and is already in good condition. Place aerosol cans in water at about 50°C (122°F) before use to increase the pressure inside the can. This produces a more even, higher-quality spray. Do not put in hotter water, as the increase in pressure can cause issues to the aerosol! Start spraying just off the edge of the part, then move the spray onto the surface without releasing the trigger. The first burst of pressure from any aerosol spits out droplets rather than an even mist. Shake every aerosol can for 3–5 minutes before use. Read the instructions on your specific clearcoat, primer, rust converter, and paint before use. Drying times vary by product. Prime only the damaged area where possible. Apply paint slightly beyond that area, but clearcoat the entire part/panel to avoid a visible line where the clearcoat starts and stops. If not possible, you will need to sand with P3000 and polish the faded part of clearcoat. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €93,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Subaru spray paint, matched to your factory color code. Available for popular Subaru paint codes like 33L, 37J, 42C, 61K, 74F, CB4, CR3, G1U, J8U, K1X, K3X, K7X, MG2, PAF, TAP, UCD, and any other Subaru paint code. Choose your Subaru spray paint kit 1. Subaru spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Subaru quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Subaru small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Subaru basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Subaru large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Subaru rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Subaru paint color code list Code Color name 33L Champagne Gold Opal Metallic 37J Satin White Pearl — tri-coat 42C / 02C WR Blue Pearl (World Rally Blue, 2001-2016) 61K Dark Gray Metallic 74F New 555 Blue Mica Pearl (Rally Blue / Sonic Blue) CB4 / D4S Crystal Black Silica CR3 Crimson Red Metallic G1U Ice Silver Metallic J8U Quartz Blue Pearl K1X Crystal White Pearl — tri-coat K3X Lapis Blue Pearl K7X WR Blue Pearl (World Rally Blue, 2013 on) MG2 Magnetite Gray Metallic PAF Cool Gray Khaki TAP Autumn Green Metallic UCD Brilliant Bronze Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Subaru paint code On most Subarus the paint code is on a white or silver sticker in the driver's side door jamb - open the driver's door and look for the label marked "C/#" or "PAINT". The paint code is three characters long, for example "K1X" or "02C". If the sticker is missing, check under the bonnet on the strut tower, in the spare wheel well, or on the plate near the firewall on older models. Can't find it? Call Subaru dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Tesla spray paint, matched to your factory color code. Available for popular Tesla paint codes like 280E, 3BK00, NEU-107E, NEU-108E, PB00, PB02, PBCW, PBSB, PMNG, PMSS, PN00, PN01, PPMR, PPSB, PPSW, PR00, PR01, PX02, and any other Tesla paint code. Choose your Tesla spray paint kit 1. Tesla spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Tesla quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Tesla small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Tesla basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Tesla large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Tesla rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Tesla paint color code list Code Color name 280E Ultrablack 3BK00 Jet Black NEU-107E Sonic Silver Metallic NEU-108E / PMBL Obsidian Black Metallic PB00 Frost Blue Metallic PB02 Marine Blue PBCW Catalina White PBSB Solid Black / Eclipse Black PMNG / NEU-112E Midnight Silver Metallic / Steel Grey PMSS Silver Metallic / Starlight Silver PN00 Quicksilver PN01 / NEU-306E Stealth Grey PPMR / PMMR / R-102E Red Multi-Coat / Sunset Red - tri-coat PPSB / B-101E Deep Blue Metallic / Ocean Blue PPSW Pearl White Multi-Coat / White Water - tri-coat PR00 / R108E Crimson Red Metallic - tri-coat PR01 Ultra Red - tri-coat PX02 / NEU-252E Diamond Black Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". If it's a tri-coat color, you also need to order one additional spray can for the effect layer. How to find your Tesla paint code On most Teslas the paint code is on the manufacturing sticker in the driver's side door jamb - open the driver's door and look at the B-pillar, where the code is printed in the lower left corner after "PNT:". Tesla codes are four characters long, for example "PPSW" or "PBSB". On cars built in China the sticker is in the passenger's side door jamb instead. Can't find it? Call Tesla dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Sanding in only one direction leaves deep grooves. Matte (scuff) and degrease the surface, even if it only needs repainting and is already in good condition. Shake every aerosol can for 3–5 minutes before use. Warm the cans in water at about 50°C (122°F) before use. This raises the pressure inside the can and gives a finer, more even spray. Never use water hotter than 50°C, because the can could burst. Start spraying just off the edge of the part, then move onto the surface without releasing the trigger. The first burst from any aerosol spits droplets instead of an even mist. Prime only the damaged area where possible and apply paint slightly beyond it, but clearcoat the entire part/panel so no clearcoat edge is visible. If that's not possible, sand the clearcoat edge with P3000 and polish it. Read the instructions on each product (rust converter, primer, paint, clearcoat) before use. Drying times vary by product. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €109,90
Repair rust bubbles, deep scratches, or repaint a replaced part with Toyota spray paint, matched to your factory color code. Available for popular Toyota paint codes like 040, 070, 202, 218, 1C0, 1F7, 1G3, 1K3, 3U5, and any other Toyota paint code. Choose your Toyota spray paint kit 1. Toyota spray paint (for those who already have everything else: primer, clearcoat, surface prep materials, and just need the color-matched paint) 1× spray can of custom-mixed base paint (matched to your paint code) 2. Toyota quick-fix spray can (for a fast, temporary fix) 1× spray can of base paint with 1K clearcoat built in (lower durability and gloss than a full two-stage repair) 3. Toyota small spray paint kit (for those who have already prepped the surface) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 4. Toyota basic paint kit (for surfaces in good overall condition, no surface damage) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 5. Toyota large spray kit (for slight surface damage - surface rust, small rust bubbles, scratches till metal, etc.) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka or Radex) Degreaser spray (Car-Rep if available, else HB-Body) 6x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 6. Toyota rust & hole fixing kit (for significant surface damage, including significant rust and holes) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m Radex sandpaper for surface cleaning (P80, P120, P180) each 1× spray can rust converter and primer (2-in-1) (Chamaleon) Plastic putty knife (1 flexible, 1 stiff) (Colad) Aluminum mesh for holes (U-pol) Glass fiber putty (0.4kg) (Radex or Multifuller) Finishing putty, small package (0.2kg) (Radex or Multifuller) 0.5m Radex sandpaper for surface prep (P240, P320, P400, P600) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep or HB-Body) 8x Degreaser wipes 1× epoxy primer spray (Radex pro-line or Roberlo - appropriate color for your paint) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) 7. Plastic part spray kit (for unpainted plastic parts) 25mm Radex masking tape Masking film for covering surrounding areas (4m × 5m) 0.5m grey matting non-woven abrasive (Mirka if available, else Radex) Degreaser spray (Car-Rep if available, else HB-Body) 4x Degreaser wipes 1× plastic primer spray (HB BODY PLASTOFIX if available, Car-Rep or other alternatives otherwise) 1× Acrylic primer spray (appropriate color for your paint - Radex or Car-Rep) 1× spray can of custom-mixed base paint 1× spray can of clearcoat (HB BODY 2K HS if available, else CAR-REP acrylcomp or Radex) Product images are for illustration only; actual packaging may vary. If a listed brand is unavailable from the factory for more than 2 days, we substitute a similar-quality alternative. Toyota paint color code list Code Color name 040 Super White (Cirrus White) 070 White Pearl Crystal Shine / Blizzard Pearl - tri-coat 089 Platinum White Pearl / Wind Chill Pearl - tri-coat 1C0 Silver Metallic 1D6 Silver Sky Metallic 1F7 Classic Silver Metallic (Silver Pearl) 1G3 Magnetic Grey Metallic (Decuma Grey) 1H2 Dark Steel Metallic 1H5 Cement / Manhattan Grey Metallic 1K3 Celestite Grey Metallic 202 Black (Astral / Ebony Black) 209 Ink Metallic 218 Attitude Black Metallic 3R3 Barcelona Red Metallic 3U5 Emotional Red 2 Metallic 4E9 Sandy Taupe / Beige 4V8 Avant Garde Bronze Metallic 6X3 Urban Khaki 8S6 Dynamic Blue / Dark Blue Metallic Each spray paint is custom-made based on the most popular variant of your color code. Your code isn't in the list? Order "Other". When ordering tri-coat color code, order additional spray paint can for effect layer. How to find your Toyota paint code On Toyotas the paint code is on the vehicle identification sticker in the driver's side door jamb - open the driver's door and look for the code next to the "C/TR" heading. Can't find it? Call Toyota dealer center service/parts department, ask for color code & provide VIN. Still can't figure it out? Select "Other" at checkout and add your car's registration number (XX-1234) to the order notes. We'll look it up in the database (Latvian clients). When ordering tri-coat color code, order additional spray paint can for effect layer. How much paint do you need? One spray can covers approximately 1 m² (about one car door, one wing/fender, or one sill). As a rough guide: Door, wing/fender, sill: 1 spray can each Front or rear bumper, boot/trunk lid: 2 spray cans each Full roof or full bonnet/hood: 3 spray cans Coverage varies depending on the actual car size & tone of paint. Treat these numbers as estimates. If painting larger parts, you will need additional small spray kits (paint and clearcoat). Spray paint application: key tips Environment you'll need A dust-free work area Temperature of at least 15°C (59°F) Good lighting Roughly 4 hours of free time up to a full day, depending on the condition of the part PPE safety (respirator & gloves) Tips and tricks Sand in a cross pattern: two strokes up and down, then two strokes left and right, and repeat. Avoid sanding in only one direction; this prevents deep grooves from forming. Matte (scuff) and degrease the surface during preparation, even when it only needs repainting (no sanding or filling) and is already in good condition. Place aerosol cans in water at about 50°C (122°F) before use to increase the pressure inside the can. This produces a more even, higher-quality spray. Do not put in hotter water, as the increase in pressure can cause issues to the aerosol! Start spraying just off the edge of the part, then move the spray onto the surface without releasing the trigger. The first burst of pressure from any aerosol spits out droplets rather than an even mist. Shake every aerosol can for 3–5 minutes before use. Read the instructions on your specific clearcoat, primer, rust converter, and paint before use. Drying times vary by product. Prime only the damaged area where possible. Apply paint slightly beyond that area, but clearcoat the entire part/panel to avoid a visible line where the clearcoat starts and stops. If not possible, you will need to sand with P3000 and polish the faded part of clearcoat. Distances and timing (verify against your specific product; this varies by manufacturer) Rust converter: 25–30cm from the part, 3–6h between coats (depending on the product), 2–3 coats. 24h cure recommended after the final coat. Primer: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Paint: 25–30cm from the part, 15 min between coats, 2–3 coats (until evenly covered). 1h after the final coat. Clearcoat: 15–20cm from the part, 15 min between coats, 2–3 coats (until an even, glossy finish; avoid overspraying, which causes drips/runs). Safe to drive after 12 hours of last coat. Should wait 1 week at 15°C (59°F) to polishing / washing. Fully dried after 1-2 weeks. Full guide on spray paint fixing here.
€15,95 - €96,90
Select your car brand below to get a custom-matched spray paint kit for scratches and panel repainting. We mix car paint formulas by color code for all auto manufacturers, as well as RAL, and NCS color codes.
Can’t find your specific brand? Order our Universal Custom-Mixed Touch-Up Paint and enter your paint code and brand or color details at checkout.
