Primers

Chamaleon Rust Converter and Primer in a spray can, spray volume 400ml. It is a epoxy-resin based anti-rust agent which chemically neutralizes rust and forms a primer layer for further treatment. Before use, it is advisable to mechanically clean the rust with a wire brush. Touch dry after 12 hours of drying, apply the next layer after 24 hours of drying at a minimum temperature of 15 degrees in a room with a humidity concentration of less than 65 percent. Chamaleon Rust Converter technical data in English

Read more less

HB BODY P340 PLASTOFIX is a clear plastic primer (adhesion promoter) for plastic car parts available in spray can or 500ml metal can. P340 plastofix goes on first as a thin, invisible layer that the primer and paint can hold on to, so the repair does not peel or chip later. It also works on metal parts and on filler if additional adhesive layer is necessary. Ready to use. Works on many surfaces - all car plastics except pure polyethylene (PE). Quick to work with: You can paint over it after only 10 minutes at 23°C (73°F), using any acrylic or epoxy primer and topcoat. The layer is transparent and has no effect on the paint shade on top. One litre covers about 30 to 35 m² at 10 microns dry film thickness. P340 PLASTOFIX Directions for use Clean the part: The surface must be dry and clean, with no grease, wax or dirt on it. Keep it clean and dry at every step that follows. Sand if needed: Metal parts and polyester filler need to be sanded first with a suitable grit paper. Bare plastic parts do not need sanding, only cleaning. Degrease: Wipe the surface with degreaser. Use two cloths: one to wipe the cleaner on, one to wipe it off. Always wipe it off while it is still wet, using a clean dry cloth. Remove dust: Blow the part with clean air, then wipe it with a tack cloth to pick up the last dust. Get the product ready: Shake the tin or can well. Nothing else is needed, the product is ready to use. Apply 2 very thin coats. Together they should give 20 to 30 microns (0.8 to 1.2 mil) of dry film, which is a very thin layer. Wait between coats: Leave 5 minutes at 23°C (73°F) after the first coat before you spray the second one. Paint over it: After 10 minutes at 23°C (73°F) you can apply any primer and topcoat. P340 PLASTOFIX Care & safety instructions This is a professional product. Always wear protective equipment and work in a room with good airflow. Read the safety data sheet (MSDS) and the warnings on the label before you start. Do not use it when the temperature is below 10°C (50°F). Do not use it on pure polyethylene (PE) parts. It will not grip properly on that plastic. Do not thin it. Adding thinner or reducer will weaken how well it grips. Store it in the original unopened tin in a cool place, 5 to 25°C (41 to 77°F). It keeps for 24 months. Specific gravity: 0.87 ± 0.02 g/cm³. Solid content: 5 ± 2% by weight. VOC (2004/42/EC): category IIB(a), limit 850 g/L. This product contains 850 g/L ready for use.

Read more less

Multifuller plastic primer in a can, total volume 1 liter. Designed for application to surfaces made of plastic, especially polypropylene, PP and their mixtures. For usage tips read technical data sheet. Multifuller plastic primer 1l product full description and technical data sheet in English

Read more less

Multifuller 5:1 acrylic primer with hardener. Available in black, grey and white. Sizes 800 ml with 160ml hardener or 2500ml with 500 ml hardener for a 1:5 ratio. Must be used within an hour of mixing. Use 25-30% acrylic thinner if used with paint gun. Full usage tutorial in TDS. Multifuller 5:1 Acrylic Primer product technical data sheet in English

Read more less

HG POWER GLUE primer is a preparatory coating that improves adhesion on difficult-to-bond plastics (volume - 15ml). Some plastics, such as PE and PP, have a wax-like surface that prevents glue from bonding properly. Without a primer, adhesion is non-existing or weak and unreliable. Using this primer allows you to securely bond wax-like materials such as PE and PP. Prior to applying primer surface must be cleaned and degreased. For best adhesion everything should be applied at room temperature.

Read more less

RADEX Rust Stop is a rust converter that performs the functions of a primer. Small 50ml package has a brush included, 250ml plastic bottle, 1l metal can. Radex rust stop application If not used entirely in one go, then use a different brush and different bottle, so the entirety of the product does not react to rust particles. The product should be applied to a sanded and mechanically cleaned metal surface with a brush to neutralize the deeper rust pores, and to avoid "rust bubbles". After 3 hours at 20 C, it forms a durable black matte coating, which can be further processed with the necessary materials (putty, other primer, or directly paint). Consumption 100ml ~ 1.5 square meters.

Read more less

RADEX CR+ Washprimer is an anti-corrosion wash primer based on polyvinyl resins. Contains 800 ml metal can + 400 ml activator. It is also ideal for isolating putty spots before the filler application. Should not be used together with epoxy solutions. To order components separately contact us through email.

Read more less

Multifuller epoxy primer with 1:10 hardener (by weight) 1kg + 100g, should add from 20-30% epoxy thinner if used with spray gun. Use within 1.5 hours after mixing, 10 min between layers. Multifuller can be applied over: Bare steel and aluminum after matting and degreasing. Zinc coated steel after matting and degreasing. Sanded polyester-glass laminates (GFK/GRP) as well as epoxy-glass. Old finishes in good condition after matting and degreasing.

Read more less

RADEX SPRAY-IT primer is a one-component car primer in a spray can - total volume 500ml. Used before applying paint to fill the sanding marks from p600 and form an adhesion layer. Before priming, it is mandatory to at least matte and degrease the surface.

Read more less

RADEX VHS primer is designed for various types of repair work and can be used both as a primer and as a filling primer. RADEX VHS primer is available in white, gray, black. The surface is very easy to sand. VHS 4:1 primer provides very good adhesion to various metal surfaces. RADEX VHS product includes either 1l primer + 250ml hardener or 3.6l primer +900ml hardener metal cans. If separate components necessary, contact us through email.

Read more less

RADEX  EP EPOXY can be used as a primer layer both for filling and for wet on wet painting depending on amount of epoxy thinner added. Able to fill small unevenness. RADEX EP Epoxy primer works as corrosion protection and can also be used as a post-sanding filler under all types of paints. Includes 1l RADEX epoxy primer 800 ml (800003) and 400ml 1:2 RADEX epoxy hardener (800100) in metal can. If components needed separately, contact us on email.

Read more less

CAR-REP Anti-rust primer spray is a high quality, fast drying acrylic 400 ml spray primer. Suitable for almost all surfaces such as metal, wood, hard plastic, stone, concrete, glass, vinyl and many other materials. It is recommended to mechanically clean the surface from rust before priming to ensure longer corrosion protection. Prior to priming plastic suggested to apply another layer of plastic primer. Shake the spray for about 2 minutes, spray from a distance of about 20-30 cm, 2-3 layers, 10-15 min between layers at 20 degrees Celsius. One spray can is ~ for 1 small body panel - fender, door (~1m2). Bumpers, hood, roof require 2-3 spray cans for cars, and more for vans.

Read more less

RADEX EPOXY pro-line filler epoxy primer, which provides corrosion protection. Available in black and light grey, total volume of the aerosol – 400 ml. Insulating effect against moisture. Very fast drying time. 

Read more less