Pre-washes

PLASH PLASH SNIEGS car washing snow foam

PLASH SNIEGS Concentrated foam product made to create thick, long-lasting foam. It also acts as a slick car shampoo created for safe manual washing with a microfiber mitt to prevent scratches. Thick foam: Creates a stable, slick layer for safe vehicle washing. pH neutral: Safe for all surfaces and protective coatings. Versatile use: Perfect as both a pre-wash snow foam and a standard car shampoo. Volume: 1000ml capacity. Directions for use Pre-wash: If the vehicle has not been washed for over a week, pre-wash with specialized pre-wash solutions first. Prep sprayer: Mix Plash SNIEGS with water at a 1:10 ratio (100ml product to 1000ml water) in the Plash foam sprayer. Do not exceed 1500ml total liquid volume. Close tightly and use the foam nozzle. Apply: Pump the handle 35–50 times, shake the sprayer, and apply foam evenly over the vehicle. Prep bucket: Fill a bucket with water and add 50–70ml of Plash SNIEGS per 10L of water. Insert the microfiber mitt and use a water stream to build foam. Contact wash: If pre-washed: Wash immediately with a microfiber mitt using straight lines from top to bottom. Rinse the mitt regularly in clean water. If not pre-washed: Rinse the vehicle, apply a new layer of foam, and then wash. Rinse: Do not allow the foam to dry on the surface. Rinse the vehicle body thoroughly. Care & safety instructions Wear protective gloves and shake the bottle thoroughly before use. Ensure the vehicle body and hood are cool to the touch. In warm weather, work in the shade and cool the surface with water before application. Do not apply on hot surfaces or allow the product to dry. Foam sprayer dilution: 1:10. Bucket dilution: 1:140 to 1:200.

PLASH PLASH STARTS pre-wash

Pre-wash concentrate created to prepare vehicle bodywork for more effective foam action. Plastic bottle, 1l package. Concentrated formula: Dilute at a 1:10 ratio (e.g., 100ml product to 1000ml water). Surface safe: Safe for use on all exterior vehicle parts. Application compatibility: Made for use with the Plash foam sprayer emulsion nozzle. Directions for use Rinse: Rinse the vehicle with water first. Prep sprayer: Mix Plash STARTS with water at a 1:10 ratio in the Plash foam sprayer. Do not exceed 1500ml total liquid volume for maximum efficiency. Close tightly and install the emulsion nozzle. Apply: Pump the handle 35–50 times, shake the sprayer, and apply evenly to all vehicle surfaces. Dwell: Let the product react for 1–2 minutes. Apply Car Shampoo foam directly on top to keep the surface wet and boost the pre-wash effect. Rinse: Rinse thoroughly with a strong water stream, starting with the dirtiest areas. Contact wash: Apply Car Shampoo foam to the car again. Afterwards perform a manual contact wash using a car shampoo & microfiber mitt.

PLASH PLASH TURBO high-performance pre-wash

PLASH TURBO is a powerful, alkaline-formula pre-wash designed for deep cleaning vehicle bodywork - 1l plastic bottle package. Formulated for demanding conditions to quickly dissolve road salt, oil, grease, bugs, and stubborn grime. Alkaline formula: Dissolves heavy road film and organic contaminants efficiently. Deep cleaning action: Lifts baked-on grime and winter salts. Fast results: Minimizes manual scrubbing by loosening dirt before the contact wash. Directions for use Dilute: Mix the concentrate with water at a 1:10 ratio. The bottle is sufficient for 5–8 washes. Apply: Spray the solution evenly onto the dry vehicle surface, starting from the bottom and working upward. Dwell: Allow the product to react for a few minutes. Do not let it dry on the surface. Rinse: Rinse the vehicle thoroughly with a high-pressure washer, moving from the bottom up. Care & safety instructions Do not apply on hot surfaces or in direct sunlight. Do not allow the product to dry on the paintwork. Test on an inconspicuous area before applying to sensitive finishes or chrome trim. Keep out of reach of children.