Car Shampoos

TONYIN Wash & Wax Extreme Snow Foam – bottle – 473 ml – cuts through dirt and grime while adding a layer of wax protection during the wash. pH balanced: Safely cleans the vehicle without stripping or damaging any existing car waxes or sealants. Deep cleaning: Rapidly breaks down and lifts away tough road dirt, dust, and grime. Highly concentrated: Ultra-dilutable formula works at up to a 1:800 ratio for excellent efficiency and thick foam production. Gloss boost: Leaves a touch of wax behind to enhance shine and water-beading right after rinsing. TONYIN Wash & Wax Extreme Snow Foam directions for use Dilute: Mix the foam concentrate with water in a foam cannon bottle or a wash bucket. Use up to a 1:800 dilution ratio depending on the desired foam thickness. Foam: Spray the thick foam evenly over the entire cool vehicle surface, or apply using a soft wash mitt. Dwell: Let the foam sit on the paint for 1–2 minutes to loosen dirt. Do not let it dry on the surface. Rinse: Rinse the vehicle thoroughly with a high-pressure stream of clean water, then dry with a microfiber drying towel. TONYIN Wash & Wax Extreme Snow Foam product compatibility Safe for all exterior vehicle surfaces, including gloss paintwork, clear coats, glass, chrome, plastic trim, and wheels. Perfect for routine maintenance washes on vehicles protected by waxes, sealants, or ceramic coatings.

Read more less

PLASH MAIGAIS High-foaming wheel and tire shampoo created to clean daily dirt and deep deposits. It removes wheel yellowing, oily grime, and baked-on road dirt while remaining safe for surfaces. Wheel cleaning: Removes yellowing and baked-on road grime from wheels. Tire safe: Effectively cleans tire rubber without causing damage. Alkaline formula: High-foaming, alkaline composition that is gentle on surfaces. Capacity: 500ml. Directions for use Prep: Shake the bottle and spray the product evenly onto a completely cooled, pre-rinsed wheel which has tar and iron fallout removed prior to washing. Leave on surface: Let the product react for 1–2 minutes. Do not allow it to dry. Agitate: Clean the dirt using a wheel brush, detailing brush, or microfiber mitt. Use a separate mitt for wheels to avoid scratching the paintwork. Rinse: Rinse the wheel thoroughly with water to remove all product residue. Repeat: Clean each wheel one by one. Product details & safety Test on a less visible area before full application, especially on polished, chrome, anodized, or matte wheels. In hot weather, work in the shade and cool the wheels with water until they are cool to the touch before application. Clean each wheel individually; do not spray all wheels at the same time. Do not let the product dry on the surface. Wearing protective gloves is necessary. Store only in the original packaging.

Read more less

PLASH SNIEGS Concentrated foam product made to create thick, long-lasting foam. It also acts as a slick car shampoo created for safe manual washing with a microfiber mitt to prevent scratches. Thick foam: Creates a stable, slick layer for safe vehicle washing. pH neutral: Safe for all surfaces and protective coatings. Versatile use: Perfect as both a pre-wash snow foam and a standard car shampoo. Volume: 1000ml capacity. Directions for use Pre-wash: If the vehicle has not been washed for over a week, pre-wash with specialized pre-wash solutions first. Prep sprayer: Mix Plash SNIEGS with water at a 1:10 ratio (100ml product to 1000ml water) in the Plash foam sprayer. Do not exceed 1500ml total liquid volume. Close tightly and use the foam nozzle. Apply: Pump the handle 35–50 times, shake the sprayer, and apply foam evenly over the vehicle. Prep bucket: Fill a bucket with water and add 50–70ml of Plash SNIEGS per 10L of water. Insert the microfiber mitt and use a water stream to build foam. Contact wash: If pre-washed: Wash immediately with a microfiber mitt using straight lines from top to bottom. Rinse the mitt regularly in clean water. If not pre-washed: Rinse the vehicle, apply a new layer of foam, and then wash. Rinse: Do not allow the foam to dry on the surface. Rinse the vehicle body thoroughly. Care & safety instructions Wear protective gloves and shake the bottle thoroughly before use. Ensure the vehicle body and hood are cool to the touch. In warm weather, work in the shade and cool the surface with water before application. Do not apply on hot surfaces or allow the product to dry. Foam sprayer dilution: 1:10. Bucket dilution: 1:140 to 1:200.

Read more less

KochChemie CES Ceramic Effect Shampoo is a care shampoo for hand washing with a sponge. 1l bottle. It cleans and additionally protects the surfaces for a long time in just one step. Creates a smooth, tactile soft and very hydrophobic surface with a very good deep gloss. Dilute the shampoo for hand washing in a wash bucket 1:200 (50 ml to 10 l of water). The quick and easy-to-use shampoo is ideal for surfaces that are already coated with ceramics or protective wax and increases the service life of the respective coating. With a pleasantly fresh berry-almond scent. Do not use BEFORE applying ceramic coating or wax. KochChemie CES full product description in English KochChemie CES technical data sheet

Read more less

KochChemie AS Auto Shampoo is a car shampoo with pH 9, which is a phosphate- and NTA-free car shampoo for washing in the car wash, with the foam generator or by hand, 1l packaging. The combination of anionic and nonionic surfactants guarantees gentle and thorough cleaning. Optimally suitable also for biological technical water treatment plants. KochChemie AS Autoshampoo full product description in English KochChemie AS Autoshampoo technical data sheet

Read more less