Anti-corrosion agents and cavity waxes protect the chassis from within. Apply through door, sill, and panel technical holes to prevent rust, salt damage.
Cavity waxes
-
CAR-REP CAR-REP Hollow Section Cavity Wax spray
Car-rep Hollow Section is a wax-based protection for your car's doors and sill panels, underbody interior sections. Spray-can total volume 500ml. Applied through the technical holes with a special spray tube. It penetrates the smallest gaps, removing moisture and protecting against rust. Instructions: Cover all surfaces that do not need to be treated. Shake the spray approx. 3 minutes before use. Spray several thin layers, allowing the wax to dry between sprays.
€11,95
-
RADEX 110ML Cavity wax
RADEX ML 110 is a non-paintable transparent elastic wax coating 1l bottle. It has excellent anti-corrosion properties. The internal cavity wax perfectly displaces water and can be applied even to damp surfaces, but it is recommended to apply it to as dry internal surfaces as possible. After drying, the coating remains slightly sticky and elastic without a specific smell. Apply with a anti-gravel gun with an extended spray tube through the technical holes on the internal surfaces of the car body panels and sills, to protect the car from rusting for a longer period of time.
€17,50
-
Mercasol Mercasol 1 - Anti-corrosion cavity wax
Mercasol 1 is a thin, solvent-based, easy-to-spray anti-corrosion liquid based on wax, sulfonate and oil for internal surfaces (sills, door frames, etc.). 600ml total volume spray can and 1l net volume bottle for use with anti-gravel gun. The product has very good anti-corrosion properties for a long time if the surface is prepared correctly. The wax dries to a brown, oily, moisture-repellent coating. Mercasol 1 has been tested for compatibility with the most common anti-corrosion protection systems on the market. Mercasol 1 is intended for the protection of vehicle cavities, flanges and joints against corrosion. Mercasol 1 can also be used as a primer on exposed surfaces in combination with Mercasol 3 and 3AL underbody corrosion protection products. Mercasol 1 application guide The surfaces to be treated must be dry and free of rust, dirt, salt and oil. The 1 liter bottle of Mercasol 1 is primarily intended for use with a compressed air gun. Mercasol 1 aerosol is applied with the nozzles provided in the package. Application should be carried out indoors at a temperature of +15 to +25°C. Drying time depends on temperature and humidity, at +23°C and 50% RH, drying time is approx. 8 h. If Mercasol 3 or Mercasol 3AL is planned to be used, Mercasol 1 must be allowed to dry for 1 hour before applying Mercasol 3 or Mercasol 3AL. Mercasol 1 technical data sheet in English
€16,95 - €20,45