Radex provides car-body repair materials selected from the world’s leading manufacturers to ensure a quality process from degreasing till polishing & waxing.
RADEX
-
RADEX RADEX SPRAY-IT 1k spray paint
RADEX SPRAY-IT 1k spray paint, aerosol volume 500ml ~1m2-1.5m2 in two layers. Available in white glossy, black glossy, black matte and silver glossy colors. One-component paint suitable for simple painting jobs. Surface should be matted or primed & degreased for longer lasting results. After these colors it is not necessary to apply clearcoat. RADEX SPRAY-IT 1K is NOT Solvent / fuel resistant.
€7,20
-
RADEX RADEX Brown masking tape
RADEX brown masking tape - 100 degree Celsius temperature resistance. Available in widths from 19mm to 50 mm, length of a single roll - 40m. Resistant to solvents and water. Designed to cover moldings, headlights or bumpers edges prior to painting or polishing, and to fix masking paper or film.
€1,50 - €3,90
-
RADEX RADEX SPRAY-IT clearcoat
RADEX SPRAY-IT clearcoat in 500 ml aerosol is a protective layer applied on the base color to give it durability and shine. Clearcoat can be applied in 2 layers for ~1.5m2 area. Suggested time between layers - 15 minutes at 20 degrees Celsius. Final layer should leave shine immediately after spraying (10-15cm distance from surface.) 1K lacquer is not resistant to solvents. Do not apply in a place where fuel and other solvents will get to it.
€7,50
-
RADEX RADEX SOFT finishing putty
RADEX Soft putty is intended as the last layer of putty, because it best retains the final form. RADEX Soft putty is available in 0.2 kg and 1.8 kg packaging - and necessary amount of putty hardener. Do not build than 1mm per layer.
€5,20 - €19,50
-
RADEX RADEX 210 - UBC underbody coating - bitumen
Anti-corrosion protection agent RADEX 210 UBC on bitumen base for the underbody treatment - car body floor and wheel arches. 1l package for UBC spray gun. After drying, it retains a sticky layer that protects against salts, moisture, corrosion and mechanical damage, such as stone impacts. Shake well before use, mechanically remove rust, clean surface, degrease. Applied with UBS gun. Apply 1-2 layers with 15-30 min pause at 20 degrees Celsius. Full drying time 4-6 hours, but will always have a slightly sticky layer.
€10,95
-
RADEX RADEX Softmatt matting non-woven
RADEX SOFTMATT abrasive material is intended for surface matting. Red color is RADEX Softmatt VF (Very Fine), gray color is RADEX UF (Ultra Fine) - width 115mm. Very Fine (Red) – surface preparation before priming. Ultra Fine (Grey) – for preparing the ground before painting, for matting the lacquer layer for transitions. RADEX Softmatt nonwoven abrasives material is intended for matting the surface, including difficult areas prior to applying any types of coatings.
€4,20 - €40,90
-
RADEX RADEX 701 polyurethane sealant
RADEX 701 One-component polyurethane sealant - 290 ml, available in white, gray and black. Fast-curing and flexible sealant for sealing the car body, weld connections. For use with a caulking gun. Specially formulated to meet the demands of the automotive industry. The sealant has a controlled viscosity and is easy to smooth with a brush or rubber blade if a thin sealant layer is required. It is repaintable after surface curing.
€7,95
-
RADEX RADEX MASKING FILM
RADEX Masking film is a high density transparent polyethylene film with an electrostatic coating used to cover surfaces that do not need to be painted. Available in 4 x 5 meters and 4 x 7 meters films.
€1,50 - €2,00
-
RADEX RADEX SEAL BS joint sealant
Radex BS Seal is a one-component synthetic rubber sealant for seams in 1kg metal can. The Quickly forms an elastic textured coating similar to the original seams. Radex BS Seal seam sealant has good mechanical strength, excellent anti-corrosion and soundproofing properties. The product has resistance to water, oil, gasoline. product is very easy to apply with a mastic brush (must have stiff bristles, as it is very thick). Brushes not included.
€23,95
-
RADEX RADEX HS 2K clearcoat with hardener
Radex HS is a high quality, 2k high density car clearcoat. Thanks to the ultra-fast drying technology and excellent initial hardness, it reduces repair time and energy consumption when polishing after painting. RADEX HS clearcoat is used with VC30 (standard) or VC10 (fast, low temperature) hardeners in a ratio of 2:1. Can add up to 10% RADEX AT10, or AT30 thinners accordingly for thinning the texture if necessary. Can be applied on base paint and water-based paint base layers. Drying time at 20 degrees Celsius - 14 hours. Use within 30 mins when mixing with VC10 and within 2 hours when mixing with VC30. In the store, you can order this product by weight starting from 100ml. To order components separately, contact us through email.
€40,45 - €196,45
-
RADEX RADEX SPRAY-IT acrylic spray primer
RADEX SPRAY-IT primer is a one-component car primer in a spray can - total volume 500ml. Used before applying paint to fill the sanding marks from p600 and form an adhesion layer. Before priming, it is mandatory to at least matte and degrease the surface.
€7,20
-
RADEX RADEX UNI universal putty
RADEX UNI filler is designed to fill small irregularities in the bodywork. Available in 0.45 kg and 1.8 kg packages + necessary amount of putty hardener. RADEX UNI universal filler application Make sure surface is prepped for applying putty. Apply a thin cross of hardener (~1g) across a ~50ml sized piece, then mix and apply within few minutes. Prime only after complete drying and levelling with sandpaper.
€5,50 - €15,50
-
RADEX RADEX VHS 2K acrylic primer 1:4 with hardener
RADEX VHS primer is designed for various types of repair work and can be used both as a primer and as a filling primer. RADEX VHS primer is available in white, gray, black. The surface is very easy to sand. VHS 4:1 primer provides very good adhesion to various metal surfaces. RADEX VHS product includes either 1l primer + 250ml hardener or 3.6l primer +900ml hardener metal cans. If separate components necessary, contact us through email.
€28,50 - €104,90
-
RADEX RADEX EP Epoxy Primer with hardener, 1l + 0,5l
RADEX EP EPOXY can be used as a primer layer both for filling and for wet on wet painting depending on amount of epoxy thinner added. Able to fill small unevenness. RADEX EP Epoxy primer works as corrosion protection and can also be used as a post-sanding filler under all types of paints. Includes 1l RADEX epoxy primer 800 ml (800003) and 400ml 1:2 RADEX epoxy hardener (800100) in metal can. If components needed separately, contact us on email.
€45,50
-
RADEX RADEX 901 sprayable sealant
RADEX 901 spray sealant is a beige or grey one-component moisture-curing coating based on modified silane polymer with high mechanical strength in a 290ml bottle and to be applied with PGS sealant spray gun. It provides excellent corrosion protection. RADEX 901 application areas - welds and welded joints, forming flexible anti-chipping coatings on the bottom of cars.
€14,50
-
RADEX 110ML Cavity wax
RADEX ML 110 is a non-paintable transparent elastic wax coating 1l bottle. It has excellent anti-corrosion properties. The internal cavity wax perfectly displaces water and can be applied even to damp surfaces, but it is recommended to apply it to as dry internal surfaces as possible. After drying, the coating remains slightly sticky and elastic without a specific smell. Apply with a anti-gravel gun with an extended spray tube through the technical holes on the internal surfaces of the car body panels and sills, to protect the car from rusting for a longer period of time.
€17,50
-
RADEX RADEX PRO-LINE epoxy primer spray
RADEX EPOXY pro-line filler epoxy primer, which provides corrosion protection. Available in black and light grey, total volume of the aerosol – 400 ml. Insulating effect against moisture. Very fast drying time.
€12,50
-
RADEX RADEX 310 SP antichip, anti-gravel coating
Radex 310 SP is a sprayable anti-stone chip protective mastic made of synthetic rubber and resins in a 1l bottle supposed to be used with anti-gravel spray guns. Available in black, grey and white. Quickly creates a structured protective coating (usually on sills and on the wheel arches, locations where a painted protective layer is necessary. Must have a paint or clearcoat layer applied over it to have full protection capabilities.
€12,00
-
RADEX RADEX RUST STOP anti-corrosion agent
RADEX Rust Stop is a rust converter that performs the functions of a primer. Small 50ml package has a brush included, 250ml plastic bottle, 1l metal can. Radex rust stop application If not used entirely in one go, then use a different brush and different bottle, so the entirety of the product does not react to rust particles. The product should be applied to a sanded and mechanically cleaned metal surface with a brush to neutralize the deeper rust pores, and to avoid "rust bubbles". After 3 hours at 20 C, it forms a durable black matte coating, which can be further processed with the necessary materials (putty, other primer, or directly paint). Consumption 100ml ~ 1.5 square meters.
€6,95 - €32,50
-
RADEX RADEX GOLD sandpaper discs, 125mm, 8 holes
Radex GOLD abrasive 125 mm sanding discs with velcro base for easy connection to the grinder and 8 holes for dust extraction. Made of the highest quality aluminum oxide mineral, which combines very high sanding ability and very high wear resistance, as well as partial moisture resistance. Available from p60-P600 sandpaper - price per one piece.
€0,40 - €0,50