RADEX

RADEX purple ceramic sanding discs 150mm, 14+1 holes and velcro backing. Ceramic film discs are designed to get much faster cutting compared to other premium abrasives in the market. Special ceramic grains with the best film technology for fast cutting and extra long life. Full box has 100 pieces.

Read more less

Radex GOLD abrasive 150 mm sanding discs with velcro base for easy connection to the grinder and 14 holes for dust extraction. Available in grit from p60-p2000. Made of the highest quality aluminum oxide mineral, which combines very high grinding ability and very high wear resistance, as well as partial moisture resistance. Price per one piece, full box is 50 or 100 pieces depending on grit. There are other grit sanding discs available by custom order through email.

Read more less

RADEX PROFI MASK for masking vehicle bodywork. Available in 30, 60 cm width, and 50, 400 m length. Special treatment to makes this paper paint absorbent. Prevents water-based paints to go through it. Easy to cut and easy to apply on awkward areas. made of 100% pure unbleached long-fibre Kraft pulp. Custom orders of 400 m length 40cm, 90cm or 120cm width through email or in store (usually available immediately). 

Read more less

RADEX Green glass putty is a vehicle bodywork filler with fibreglass. Available in 0.2kg and 1.8kg packages + hardener. Due to the elastic polyester resin and medium fibres, it has better elasticity than universal fillers. Fibres provide greater filling capacity and hardness after drying. By mixing with hardener, it begins to harden in half a minute, so it should be mixed in small quantities. 

Read more less

RADEX SOFTMATT abrasive material is intended for surface matting. Red color is RADEX Softmatt VF (Very Fine), gray color is RADEX UF (Ultra Fine) - width 115mm. Very Fine (Red) – surface preparation before priming. Ultra Fine (Grey) – for preparing the ground before painting, for matting the lacquer layer for transitions. RADEX Softmatt nonwoven abrasives material is intended for matting the surface, including difficult areas prior to applying any types of coatings. 

Read more less

RADEX D30 Degreaser (standard drying time) 1l and 5l and RADEX D10 (quick drying) 5l  degreaser in metal cans are designed to clean and prepare surfaces before priming, filling and painting to ensure good adhesion to the prepared surface.

Read more less

RADEX DSA double-sided mounting tape on a polyethylene base. It is resistant to gasoline, oils, solvents, UV and temperature up to 120°C. Available in widths from 9 to 25 millimeters, length 10 meters, thickness 0,95 mm. Double-sided tape is for the assembly of trim, side moldings, emblems, signs, etc. and vibration-proof gluing on the car body. RADEX DSA double-sided tape usage guide Use on a clean degreased surface, surface and tape temperature at least 15 degrees Celsius, for best performance warm up tape and surface to 30 degrees, apply for a minute with pressure. Full bonding after 24 hours at 23 degrees Celsius.

Read more less

Radex degreasing wipes, are polypropylene wipes (60g/m2) which help to collect oils and do not leave dust or fluff. The size of the wipe is 32 x 38 cm, 250 wipes in a roll.

Read more less

RADEX Soft putty is intended as the last layer of putty, because it best retains the final form. RADEX Soft putty is available in 0.2 kg and 1.8 kg packaging - and necessary amount of putty hardener. Do not build than 1mm per layer. 

Read more less

RADEX Masking film is a high density transparent polyethylene film with an electrostatic coating used to cover surfaces that do not need to be painted. Available in 4 x 5 meters and 4 x 7 meters films.

Read more less

RADEX SPRAY-IT primer is a one-component car primer in a spray can - total volume 500ml. Used before applying paint to fill the sanding marks from p600 and form an adhesion layer. Before priming, it is mandatory to at least matte and degrease the surface.

Read more less

RADEX UNI filler is designed to fill small irregularities in the bodywork. Available in 0.45 kg and 1.8 kg packages + necessary amount of putty hardener.  RADEX UNI universal filler application Make sure surface is prepped for applying putty. Apply a thin cross of hardener (~1g) across a ~50ml sized piece, then mix and apply within few minutes. Prime only after complete drying and levelling with sandpaper. 

Read more less

RADEX ML 110 is a non-paintable transparent elastic wax coating 1l bottle. It has excellent anti-corrosion properties. The internal cavity wax perfectly displaces water and can be applied even to damp surfaces, but it is recommended to apply it to as dry internal surfaces as possible. After drying, the coating remains slightly sticky and elastic without a specific smell. Apply with a anti-gravel gun with an extended spray tube through the technical holes on the internal surfaces of the car body panels and sills, to protect the car from rusting for a longer period of time.

Read more less

RADEX EPOXY pro-line filler epoxy primer, which provides corrosion protection. Available in black and light grey, total volume of the aerosol – 400 ml. Insulating effect against moisture. Very fast drying time. 

Read more less

Radex 310 SP is a sprayable anti-stone chip protective mastic made of synthetic rubber and resins in a 1l bottle supposed to be used with anti-gravel spray guns. Available in black, grey and white. Quickly creates a structured protective coating (usually on sills and on the wheel arches, locations where a painted protective layer is necessary. Must have a paint or clearcoat layer applied over it to have full protection capabilities. 

Read more less

RADEX Rust Stop is a rust converter that performs the functions of a primer. Small 50ml package has a brush included, 250ml plastic bottle, 1l metal can. Radex rust stop application If not used entirely in one go, then use a different brush and different bottle, so the entirety of the product does not react to rust particles. The product should be applied to a sanded and mechanically cleaned metal surface with a brush to neutralize the deeper rust pores, and to avoid "rust bubbles". After 3 hours at 20 C, it forms a durable black matte coating, which can be further processed with the necessary materials (putty, other primer, or directly paint). Consumption 100ml ~ 1.5 square meters.

Read more less

RADEX plastic flex putty for plastic products. Highly flexible thanks to the plasticizer in its composition, which slightly extends the curing time but prevents pore formation. 500 ml package. Can be applied on plastics, with the exception of polyethylene and polytetrafluoroethylene (PTFE).

Read more less

RADEX EASY LIGHT PLUS is extremely light putty (density ~880 g/l) and smooth to apply. It offers excellent adhesion, solvent resistance, and reduced sanding time. 1 l package

Read more less

RADEX Multi soft multifunctional car putty with special additives for enhanced elasticity and significantly reduced shrinkage during the curing process. Very soft and easy to sand. 1.8 kg package. Can be applied on all metal surfaces, including steel, galvanized steel, aluminum as well as to polyester substrates.

Read more less

RADEX Multi glass putty is super light weight putty with glass fibres. For large repairs of heavily damaged surfaces. Creamy consistency, which allows for easy application in 2–4 mm layers and sanding with high-grit abrasives. It is also possible to use coarser abrasives (P120–P150).

Read more less

RADEX ceramic film multi-air abrasive roll with an ultra-even surface for a smooth finish. 70 mm width, 1m consisting of 14 pieces. It resists heat and holds its shape better than traditional sanding paper.  Prevents clogging: Special anti-clog coating removes sanding dust easily to keep the roll working longer. Smoother finish: Features a flat surface that is smoother than cloth and stronger than paper. Wet or dry use: Waterproof and oil-resistant for any working condition. High durability: Resists heat, stretching, and deformation under heavy use. RADEX CERAMIC FILM Multi-Air main uses Auto body work prep for painting, woodworking and furniture finishing, metal polishing and fiberglass work, sanding primers and plastics.

Read more less

RADEX metal filling knives - Set of 4 durable steel putty knives with flat plastic handles, ideal for applying and smoothing filler or putty. Includes four sizes: 50 mm, 80 mm, 100 mm, and 120 mm for versatile use in various applications.The form filling knives allow to put a thin layer, especially when regenerative or repair work demands absolute accuracy.For scraping, repairing and preparing surfaces.

Read more less

Radex RDX-10 is abrasive polishing compound, 1l plastic bottle. Based on aluminium oxide, which combines high abrasive efficiency and is designed to polish out deeper scratches.

Read more less

Professional handle gun to apply and extrude adhesives and glues contained in standard 25+25 two-component cartridges.

Read more less