MERCASOL

Noxudol UM-1600 is a fibre reinforced product for underbody treatment. 1 liter bottle for anti-gravel spray gun. A thicker layer provides a good sound damping effect. The product consists of bitumen, waxes and solvents. Noxudol UM-1600 is a durable anti-corrosion product used under the wings, inside the wheel arches and the rest of the underside of the car body where extra effective protection is needed. Noxudol UM-1600 TDS technical product info

Read more less

Mercasol 9 is a wax and oil-based anti-rust coating that penetrates deep into the pores after spraying for long-lasting rust resistance. 1 liter bottle for anti-gravel spray gun. It can also be applied to surfaces with superficial rust, but this can allow the surface to rust again more quickly. After application, it leaves a sticky surface, which must be covered with a subsequent layer of protective material (wax, anti-corrosion coating, bitumen).

Read more less

 Mercasol 3AL is a bronze-colored, wear resistant underbody corrosion protection agents, based on bitumen and wax. Spray-can 600ml total volume, bottle 1l net volume. The product has corrosion protection properties over a long period of time. Used on the underbody and in the wheel houses of vehicles in order to protect from stone chips and corrosion. The film properties of Mercasol 3 prevent them from being chipped off by e.g. gravels. The products have been compatibility tested with most corrosion protection systems. Ordering a full box (12 pcs) or more, a discount is available. Mercasol 3AL - technical product data sheet

Read more less

Mercasol 3BL is a black, wear resistant underbody corrosion protection agents, based on bitumen and wax. Spray-can 600ml total volume, bottle 1l net volume. The product has corrosion protection properties over a long period of time. Used on the underbody and in the wheel houses of vehicles in order to protect from stone chips and corrosion. The film properties of Mercasol 3 prevent them from being chipped off by e.g. gravels. The products have been compatibility tested with most corrosion protection systems. Ordering a full box (12 pcs) or more, a discount is available. Mercasol 3BL - technical product data sheet

Read more less

Mercasol 2 is a solvent-based transparent anti-corrosion protection product that leaves a completely dry and non-sticky surface. Based on wax and sulfonates, provides long-term protective properties. Mercasol 2 is mainly used on visible surfaces where a dry, non-tacky, discreet protective layer is required, for example on vehicle doors and hoods, or on tools and equipment. Mercasol 2 can also be used as anti-corrosion protection in joints and connection points. Mercasol 2 application suggestions The surfaces to be treated must be dry and free from rust, dirt, salt, and oil. Application should be carried out indoors at a temperature between +15°C and +25°C. Mercasol 2 1-liter bottle is intended for use with a compressed air spray gun together with a cavity hose. Mercasol 2 aerosol is applied using the attached nozzle and tube. When applying with an aerosol, two coats may be required to achieve the recommended dry film thickness, as the applied layer is finer compared to spraying with a gun. Mercasol 2 technical data sheet in English.

Read more less

Mercasol 1 is a thin, solvent-based, easy-to-spray anti-corrosion liquid based on wax, sulfonate and oil for internal surfaces (sills, door frames, etc.). 600ml total volume spray can and 1l net volume bottle for use with anti-gravel gun. The product has very good anti-corrosion properties for a long time if the surface is prepared correctly. The wax dries to a brown, oily, moisture-repellent coating. Mercasol 1 has been tested for compatibility with the most common anti-corrosion protection systems on the market. Mercasol 1 is intended for the protection of vehicle cavities, flanges and joints against corrosion. Mercasol 1 can also be used as a primer on exposed surfaces in combination with Mercasol 3 and 3AL underbody corrosion protection products. Mercasol 1 application guide The surfaces to be treated must be dry and free of rust, dirt, salt and oil. The 1 liter bottle of Mercasol 1 is primarily intended for use with a compressed air gun. Mercasol 1 aerosol is applied with the nozzles provided in the package. Application should be carried out indoors at a temperature of +15 to +25°C. Drying time depends on temperature and humidity, at +23°C and 50% RH, drying time is approx. 8 h. If Mercasol 3 or Mercasol 3AL is planned to be used, Mercasol 1 must be allowed to dry for 1 hour before applying Mercasol 3 or Mercasol 3AL. Mercasol 1 technical data sheet in English

Read more less